相关论文: Benefits of Feedforward for Model Predictive Airpa…
This paper presents the results of a model predictive controller (MPC) development for diesel engine air-path regulation. The control objective is to track the intake manifold pressure and exhaust gas recirculation (EGR) rate targets by…
A significant challenge in the development of control systems for diesel airpath applications is to tune the controller parameters to achieve satisfactory output performance, especially whilst adhering to input and safety constraints in the…
Diesel airpath controllers are required to deliver good tracking performance whilst satisfying operational constraints and physical limitations of the actuators. Due to explicit constraint handling capabilities, model predictive controllers…
This paper addresses the control of diesel engine nitrogen oxides (NOx) and Soot emissions through the application of Model Predictive Control (MPC). The developments described in the paper are based on a high-fidelity model of the engine…
Motion planning for autonomous vehicles requires spatio-temporal motion plans (i.e. state trajectories) to account for dynamic obstacles. This requires a trajectory tracking control process which faithfully tracks planned trajectories. In…
This paper presents a novel adaptive feedforward controller design for reset control systems. The combination of feedforward and reset feedback control promises high performance as the feedforward guarantees reference tracking, while the…
Advanced feedforward control methods enable mechatronic systems to perform varying motion tasks with extreme accuracy and throughput. The aim of this paper is to develop a data-driven feedforward controller that addresses input…
A reliable controller is critical for execution of safe and smooth maneuvers of an autonomous vehicle. The controller must be robust to external disturbances, such as road surface, weather, wind conditions, and so on. It also needs to deal…
A reliable controller is critical and essential for the execution of safe and smooth maneuvers of an autonomous vehicle.The controller must be robust to external disturbances, such as road surface, weather, and wind conditions, and so on.It…
The development of current building energy system operation has benefited from: 1. Informational support from the optimal design through simulation or first-principles models; 2. System load and energy prediction through machine learning…
Model predictive control (MPC) is an optimal control strategy where control input calculation is based on minimizing the predicted tracking error over a finite horizon that moves with time. This strategy has an advantage over conventional…
Feedforward controllers typically rely on accurately identified inverse models of the system dynamics to achieve high reference tracking performance. However, the impact of the (inverse) model identification error on the resulting tracking…
PID control is commonly utilized in an active suspension system to achieve desirable chassis attitude, where, due to delays, feedback information has much difficulty regulating the roll and pitch behavior, and stabilizing the chassis…
The increasing demands for high accuracy in mechatronic systems necessitate the incorporation of parameter variations in feedforward control. The aim of this paper is to develop a data-driven approach for direct learning of…
Floating offshore wind turbines allow wind energy to be harvested in deep waters. However, additional dynamics and structural loads may result when the floating platform is being excited by wind and waves. In this work, the conventional…
A hybrid (i.e., physics-guided data-driven) feedforward tracking controller is proposed for systems with unmodeled linear or nonlinear dynamics. The controller is based on the filtered basis function (FBF) approach, hence it is called a…
Because fuel efficiency is significantly impacted by the timing of combustion in internal combustion engines, accurate control of combustion phasing is critical. In this paper, a nonlinear combustion phasing model is introduced and…
Learning-based controllers leverage nonlinear couplings and enhance transients but seldom offer guarantees under tight input constraints. Robust feedback like sliding-mode control (SMC) provides these guarantees but is conservative in…
Feedforward steering control is a key component of hierarchical control architectures for autonomous racing. The goal is to reduce steering corrections from the feedback controllers by predicting the vehicle's inverse lateral dynamics. This…
The performance of a feedforward controller is primarily determined by the extent to which it can capture the relevant dynamics of a system. The aim of this paper is to develop an input-output linear parameter-varying (LPV) feedforward…