相关论文: Metastable defects decrease the fill factor of sol…

The conversion efficiency of dye-sensitized solar cells (DSSCs) is optimized by modifying the optical design and improving absorbance within the cell. These objectives are obtained by creating different sized cavities in TiO2 photoanode.…

The honeycomb connection of carbon atoms by covalent bonds in a macroscopic two-dimensional scale leads to fascinating graphene and solar cell based on graphene/silicon Schottky diode has been widely studied. For solar cell applications,…

In this research, the effect of Magnesium Fluoride (MgF2) Anti-Reflection (AR) layer was investigated in quantum dot sensitized solar cells (QDSCs). MgF2 nanoparticles with the dominant size of 20 nm were grown by a thermal evaporation…

Though the common metal electrode-based perovskite solar cells have achieved a power conversion efficiency of >25%, they also play a crucial role in accelerating the degradation of the cells. In this study, we investigated phase transition…

In the present investigation, the author has employed a Chemical Vapour Transport (CVT) technique to grow the crystals of GeS$_{0.25}$Se$_{0.75}$ using iodine as a transporting agent. The grown crystals were then characterized for a…

Indoor photovoltaics (IPVs) have attracted increasing attention for sustainably powering Internet of Things (IoT) electronics. Sb$_2$S$_3$ is a promising IPV candidate material with a bandgap of ~1.75 eV, which is near the optimal value for…

Sulfide chalcopyrite Cu(In,Ga)S2 (CIGS) is a wide bandgap semiconductor suitable for the top cell of a tandem solar device. Here we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S2…

In$_2$Se$_3$ in the three-dimensional (3D) hexagonal crystal structure with space group $P6_1$ ($\gamma$-In$_2$Se$_3$) has a direct band gap of $\sim$1.8 eV and high absorption coefficient, making it a promising semiconductor material for…

In this work, using the DFT and TDDFT, we have theoretically studied the electronic and optical properties of the two recently synthesized coadsorbents Y1 and Y2, which were aimed to enhance the efficiency of the black dye-sensitized solar…

Introducing an isolated intermediate band (IB) into a wide band gap semiconductor can potentially improve the optical absorption of the material beyond the Shockley-Queisser limitation for solar cells. Here, we present a systematic study of…

Atomic disorder, a widespread problem in compound crystalline materials, is a imperative affecting the performance of multi-chalcogenide Cu2ZnSn(S, Se)4 (CZTSSe) photovoltaic device known for its low cost and environmental friendliness.…

Since the photoconversion efficiency $\eta$ of the silicon-based solar cells (SCs) under laboratory conditions is approaching the theoretical fundamental limit, further improvement of their performance requires theoretical modeling and/or…

To advance knowledge of K bonding in Cu(In,Ga)(Se,S)2 (CIGS) photovoltaic (PV) absorbers, recent Cu-K-In-Se phase growth studies have been extended to PV performance. First, the effect of distributing K throughout bulk Cu1-xKxInSe2…

In this article, we theoretically demonstrate multilevel impurity photovoltaic effect in an efficient silicon dual-homojunction solar cell that ensures an extended absorption of longer wavelength light. Along with suitable contact work…

We present a comprehensive study of the electronic, magnetic, and optical properties of CuGa$_{1-x}$Fe$_x$S$_2$, as a promising candidate for intermediate-band (IB) solar cells. We use hybrid exchange-correlation functional within the…

A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…

A 2-D photonic crystal was integrated experimentally into a thin-film crystalline-silicon solar cell of 1-{\mu}m thickness, after numerical optimization maximizing light absorption in the active material. The photonic crystal boosted the…

Quantum dot solar cells (QDSC) are widely acknowledged to be one of the best solar energy harvesting devices in the present world. Absorber layer is a core component of a QDSC with a strong influence on its operational efficiency. Hence, we…

Transition metal dichalcogenides (TMDs) show great promise as absorber materials in high-specific-power (i.e. high-power-per-weight) solar cells, due to their high optical absorption, desirable band gaps, and self-passivated surfaces.…

In the present work, a light-controlled device cell is established based on the dye-sensitized solar cell using nanocrystalline TiO2 films. Voltage-current curves are characterized by three types of transport behaviors: linear increase,…