相关论文: Heat and mass transfer during crystal growing by t…
Vibrational melt flows in Czochralski crystal growth are investigated numerically on the basis of unsteady Navier-Stokes-Boussinesq formulation for incompressible fluid. The finite element code ASTRA is used for calculations. It is found…
A new setup for Czochralski growth of model materials in air atmosphere has been developed. It includes various in-situ measurements to access the basic physical phenomena on a macroscopic level: heat transfer, electromagnetism, melt and…
The heat transfer (conductive, convective, radiative) and the related problems (the unknown phase boundary fluid/crystal, the assessment of the quality of the grown crystals) encountered in the melt and vapour growth of single crystal as…
An attempt is made to review the heat transfer and the related problems encountered in the simulation of single crystal growth. The peculiarities of conductive, convective and radiative heat transfer in the different melt, solution, and…
In Part I of this study, vibration assisted heat treatments of ZBLAN glass revealed irregular crystallization at higher vibration levels, attributed to intermittent loss of thermal contact between the sample and the inner silica ampoule…
A numerical model of 2D finite element in a steady-state level was developed for the electromagnetic field, heat distribution, and thermal stress expansion in an oxide Czochralski crystal growth system. The extended model was employed to…
By using the finite element code ASTRA, the effect of vibrations on the melt flow in Bridgman crystal growth is investigated for the Earth and Space gravity conditions. It is found that the vibrations significantly decrease the width of…
The metastable vapor-liquid coexistence of short-range attractive fluids hinders the formation of crystal nuclei, which in turn makes difficult the progress of the system towards its vapor-solid ground state. In this letter we show that…
The rate of melting of a solid and the rate of deformation of the resulting melt due to capillary forces are comparable in additive manufacturing applications. This dynamic structural change of a melting solid is extremely challenging to…
Terbium titanate (Tb$_2$Ti$_2$O$_7$) is a spin-ice material with remarkable magneto-optical properties. It has a high Verdet constant and is a promising substrate crystal for the epitaxy of quantum materials with the pyrochlore structure.…
ZBLAN glass is a promising material for infrared optical fibers due to its wide transmission window and low theoretical attenuation. However, its strong tendency to crystallize during processing limits optical performance. While…
Mist/air two-phase flow is a promising cooling technique for many applications such as internal cooling of gas turbine blades. A significant enhancement of heat transfer can be achieved with a low mass fraction of droplets by utilizing the…
We investigate crystal-growth kinetics in the presence of strong shear flow in the liquid, using molecular-dynamics simulations of a binary-alloy model. Close to the equilibrium melting point, shear flow always suppresses the growth of the…
Single crystals of intermediate valent EuPd$_2$Si$_2$ were grown from an Eu-rich melt by the Bridgman as well as the Czochralski technique. The chemical and structural characterization of an extracted single crystalline Czochralski-grown…
Flow boiling in microchannel heat sinks is an efficient way to dissipate high heat flux by utilizing the large surface-to-volume ratio and high latent heat. Previous studies of boiling heat transfer in microchannels mainly consider the…
New charge transfer crystals of $\pi$-conjugated, aromatic molecules (phenanthrene and picene) as donors were obtained by physical vapor transport. The melting behavior, optimization of crystal growth and the crystal structure is reported…
The dynamic processes in the surface layers of metals subjected activity of a pulsing laser irradiation, which destroyed not the crystalline structure in details surveyed. The procedure of calculation of a dislocation density generated in…
Boiling is a very efficient way to transfer heat from a heater to the liquid carrier. We discuss the boiling crisis, a transition between two regimes of boiling: nucleate and film boiling. The boiling crisis results in a sharp decrease in…
Heat and mass transfer inside the porous wick of a capillary evaporator is studied using a mixed pore-network model. The impact of the thermal conductivity of the wick on the overheating limit (defined as the difference between the maximum…
We consider unsteady heat transfer in a one-dimensional harmonic crystal surrounded by a viscous environment and subjected to an external heat supply. The basic equations for the crystal particles are stated in the form of a system of…