相关论文: Obtaining Nanocarbon from Local Raw Materials and …

Growth of carbon nanotubes (CNTs) was performed by atmospheric pressure chemical vapour deposition (APCVD) of propane on Si(111) with a pre-treated Ni overlayer acting as a catalyst. Prior to the growth of CNTs, a thin film of Ni was…

Carbon nanotubes (CNTs) have attracted increasing attention because of their unique structural, mechanical, and electronic properties. Surface chemistry modifications are also useful and critical to manipulate the adsorptive properties of…

Applications based on Single Walled Carbon Nanotube (SWNT) are good example of the great need to continuously develop metrology methods in the field of nanotechnology. Contact and interface properties are key parameters that determine the…

Carbon nanotube fibers are materials with an exceptional combination of properties, including higher toughness than carbon fibers, electrical conductivity above metals, large specific surface area (250 $\frac{m^2}{g}$) and high…

Physisorption studies and transmission electron microscopy have been used to characterise multi-walled carbon nanotubes (MWNTs) made by a template-synthesis technique. Microscopic investigations revealed formation of 'branched nanotubes'…

This research investigates the adsorption characteristics of carbon nanobelts (CNB) and Mobius carbon nanobelts (MCNB) interacting with various greenhouse gases, including NH3, CO2, CO, H2S, CH4, CH3OH, NO2, NO, and COCl2. The study employs…

Amorphous carbon nanotubes (a-CNT) with up to four walls and sizes ranging from 200 to 3200 atoms have been simulated, starting from initial random configurations and using the Gaussian Approximation Potential [Phys. Rev. B 95, 094203…

A new method to characterize microwave electromagnetic absorption of a bulk carbon nanotube material is proposed and experimentally evaluated in this paper. The method is based on the measurement of microwave transmission through a…

Over the past 20 years, nanocarbons have become more significant as nanostructured fillers in composites and, more recently, as functional elements in a brand-new class of hybrid materials. Microwave-assisted synthesis and processing is a…

Nanocellulose prepared from the natural material has a promising wide range of opportunities to obtain the superior material properties towards various end-products. In this research, commercially available natural cotton was treated with…

Molecular level components, like carbon multiwalled nanotubes (MWNT), show great potential for future nanoelectronics. At low frequencies, only the outermost carbon layer determines the transport properties of the MWNT. Due to the…

Single-, double- and triple-walled carbon nanotubes (SWNTs, DWNTs and TWNTs) have been controlla- bly synthesized by an arc discharge method using asphalt as carbon source. The morphology and struc- ture of three kinds of products…

We report on the preparation of hydrogenated amorphous carbon nano-particles whose spectral characteristics include an absorption band at 217.5 nm with the profile and characteristics of the interstellar 217.5 nm feature. Vibrational…

The molecular dynamics method, based on an empirical potential energy surface, was used to study the effect of catalyst particle size on the growth mechanism and structure of single-walled carbon nanotubes (SWNTs). The temperature for…

Macroscopic fibers of carbon nanotubes (CNT) have emerged as an ideal architecture to exploit the exceptional properties of CNT building blocks in applications ranging from energy storage to reinforcement in structural composites.…

Adsorption and separation properties of gyroidal nanoporous carbons (GNCs) - a new class of exotic nanocarbon materials are studied for the first time using hyper parallel tempering Monte Carlo Simulation technique. Porous structure of GNC…

Macroscopic ensembles of nanocarbons, such as fibres of carbon nanotubes (CNT), are characterised by a complex hierarchical structure combining coherent crystalline regions with a large porosity arising from imperfect packing of the large…

Deterministic and versatile approaches to sample preparation on nanoscopic scales are important in many fields including photonics, electronics, biology and material science. However, challenges exist in meeting many nanostructuring…

We report a detailed analysis of the optical properties of single wall carbon nanotubes with different mean diameters as produced by laser ablation. From a combined study of optical absorption, high resolution electron energy-loss…

Carbon nanotubes are quantum sources whose emission can be tuned at telecommunication wavelengths by choosing the diameter appropriately. Most applications require the smallest possible linewidth. Therefore, the study of the underlying…