相关论文: Energy Efficiency Tradeoffs for Sub-THz Multi-User…

Terahertz (THz) communication is widely deemed the next frontier of wireless networks owing to the abundant spectrum resources in the THz band. Whilst THz signals suffer from severe propagation losses, a massive antenna array can be…

The high spectral efficiency of massive MIMO (Multiple Input Multiple Output) is mainly achieved through the exploitation of spatial multiplexing, i.e. by using a high number of MIMO layers that are applied simultaneously to many users. The…

Sub-THz bands are promising high bandwidth and data rates, and in the recent years the device technologies made large progress and provided a multitude of transceiver, power amplifier (PA) and phased array devices supporting the frequency…

Millimeter wave (mmW) communications is the key enabler of 5G cellular networks due to vast spectrum availability that could boost peak rate and capacity. Due to increased propagation loss in mmW band, transceivers with massive antenna…

Future cellular systems based on the use of above-6 GHz frequencies, the so-called millimeter wave (mmWave) bandwidths, will heavily rely on the use of antenna arrays both at the transmitter and at the receiver, possibly with a large number…

A variety of hybrid analog-digital beamforming architectures have recently been proposed for massive multiple-input multiple-output (MIMO) systems to reduce energy consumption and the cost of implementation. In the analog processing network…

A multiplicity of autonomous terminals simultaneously transmits data streams to a compact array of antennas. The array uses imperfect channel-state information derived from transmitted pilots to extract the individual data streams. The…

Terahertz (THz)-band communications are currently being celebrated as a key technology that could fulfill the increasing demands for wireless data traffic in the upcoming sixth-generation (6G) of wireless communications. Many challenges,…

Future cellular systems based on the use of millimeter waves will heavily rely on the use of antenna arrays both at the transmitter and at the receiver. For complexity reasons and energy consumption issues, fully digital precoding and…

At millimeter wave (mmWave) frequencies, the higher cost and power consumption of hardware components in multiple-input multiple output (MIMO) systems do not allow beamforming entirely at the baseband with a separate radio frequency (RF)…

Millimeter-wave and terahertz technologies have been attracting attention from the wireless research community since they can offer large underutilized bandwidths which can enable the support of ultra-high-speed connections in future…

The prospect of ultra-massive multiple-input multiple-output (UM-MIMO) technology to combat the distance problem at the Terahertz (THz)-band is considered. It is well-known that the very large available bandwidths at THz frequencies come at…

Terahertz (THz) communications are regarded as a pillar technology for the sixth generation (6G) wireless systems, by offering multi-ten-GHz bandwidth. To overcome the short transmission distance and huge propagation loss, ultra-massive…

Motivated by the stringent and challenging need for `greener communications' in increasingly power-hungry 5G networks, this paper presents a detailed energy efficiency analysis for three different multi-antenna architectures, namely…

A two-stage hybrid transceiver is designed by considering a partially connected architecture at the base station (BS) for a low-resolution multi-user (MU) THz massive multiple input multiple output (MIMO) system. Due to its high bandwidth…

Millimeter-wave (mmWave) communication operated in frequency bands between 30 and 300 GHz has attracted extensive attention due to the potential ability of offering orders of magnitude greater bandwidths combined with further gains via…

Hybrid analog-digital architectures are considered as promising candidates for implementing millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems since they enable a considerable reduction of the required number of…

Assume that a multi-user multiple-input multiple-output (MIMO) communication system must be designed to cover a given area with maximal energy efficiency (bit/Joule). What are the optimal values for the number of antennas, active users, and…

We consider a single user (SU) massive MIMO system with multiple antennas at the transmitter (base station) and a single antenna at the user terminal (UT). Taking transceiver power consumption into consideration, for a given spectral…

We consider the uplink of a multiuser massive MIMO system wherein a base station (BS) having $M$ antennas communicates coherently with $K$ single antenna user terminals (UTs). We study the energy efficiency of this system while taking the…