相关论文: Construction method for general phenomenological R…

Turbulent flow has been extensively studied using computational fluid dynamics (CFD) simulations since turbulent flow regime is so frequently encountered in both academic and engineering applications. The high-fidelity simulation of the…

Cavitation is a complex multiphase phenomenon characterised by vapour bubbles forming due to a sudden pressure drop and is often accompanied by increased hull vibrations, increased radiated noise and decrease in propeller and impeller…

This study presents a novel approach for enhancing Reynolds-averaged Navier-Stokes (RANS) turbulence modeling through the application of a Relative Importance Term Analysis (RITA) methodology to develop a new zonally-augmented $k-\omega$…

The partially-averaged Navier-Stokes (PANS) equations are used to predict the variable-density Rayleigh-Taylor (RT) flow at Atwood number 0.5 and maximum Reynolds number $500$. This is a prototypical problem of material mixing featuring…

Data-driven techniques have improved the accuracy of Reynolds-averaged Navier-Stokes (RANS) models in fluid dynamics. However, modeling separated flows remains challenging due to their complex physics and sensitivity to local conditions.…

Accurate prediction of mixing transition induced by interfacial instabilities is vital for engineering applications, but has remained a great challenge for decades. For engineering practices, Reynolds-averaged Navier-Stokes simulation…

Surrogate models are necessary to optimize meaningful quantities in physical dynamics as their recursive numerical resolutions are often prohibitively expensive. It is mainly the case for fluid dynamics and the resolution of Navier-Stokes…

While deep learning has shown tremendous success in a wide range of domains, it remains a grand challenge to incorporate physical principles in a systematic manner to the design, training, and inference of such models. In this paper, we aim…

Reynolds-averaged Navier-Stokes (RANS) turbulence models (such as k-\epsilon models) are still widely used for engineering applications because of their relatively simplicity and robustness. In fully developed plane channel flow (i.e. the…

Despite a cost-effective option in practical engineering, Reynolds-averaged Navier-Stokes simulations are facing the ever-growing demand for more accurate turbulence models. Recently, emerging machine learning techniques are making…

In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes…

The present study represents a data-driven turbulent model with Galilean invariance preservation based on machine learning algorithm. The fully connected neural network (FCNN) and tensor basis neural network (TBNN) [Ling et al. (2016)] are…

Despite the increasing availability of high-performance computational resources, Reynolds-Averaged Navier-Stokes (RANS) simulations remain the workhorse for the analysis of turbulent flows in real-world applications. Linear eddy viscosity…

Despite their well-known limitations, RANS models remain the most commonly employed tool for modeling turbulent flows in engineering practice. RANS models are predicated on the solution of the RANS equations, but these equations involve an…

Computational fluid dynamics (CFD) solvers employing two-equation eddy viscosity models are the industry standard for simulating turbulent flows using the Reynolds-averaged Navier-Stokes (RANS) formulation. While these methods are…

A promising and cost-effective method for numerical simulation of high Re wall-bounded flows is wall-modeled large-eddy simulation. Most wall models are formulated from the Reynolds-averaged Navier-Stokes equations (RANS). These RANS-based…

Direct numerical simulation (DNS) is very accurate however, the computational cost increases significantly with the increase in Reynolds number. On the other hand, we have the Reynolds Averaged Navier Stokes (RANS) method for simulating…

The representation of buoyancy-driven turbulence in Reynolds-averaged Navier--Stokes (RANS) models remains unresolved, with no widely accepted standard formulation. A key difficulty is the lack of analytical guidance for incorporating…

Turbulence models attempt to account for unresolved dynamics and diffusion in hydrodynamical simulations. We develop a common framework for two-equation Reynolds-Averaged Navier-Stokes (RANS) turbulence models, and we implement six models…

Use of appropriate initialization to warm-start Reynolds-averaged Navier-Stokes (RANS) simulations of turbulent flow can facilitate convergence and lead to efficient use of computational resources. In this work, a method to model downstream…