相关论文: Towards the ultimate PMT waveform analysis for neu…

Photomultiplier tubes (PMTs) are widely deployed at neutrino and dark matter experiments for photon counting. When multiple photons hit a PMT consecutively, their photo-electron (PE) pulses pile up to hinder the precise measurements of the…

Photomultiplier tubes (PMTs) are widely used as photon sensors for neutrino and dark matter detection. Accurate charge and time information extracted from PMT waveforms is crucial for event reconstruction. An algorithm based on…

Photomultiplier tubes (PMTs) are widely employed in particle and nuclear physics experiments. The accuracy of PMT waveform reconstruction directly impacts the detector's spatial and energy resolution. A key challenge arises when multiple…

Photomultiplier tubes (PMTs) are extensively employed as photosensors in neutrino and dark matter detection. The precise charge and timing information extracted from the PMT waveform plays a crucial role in energy and vertex reconstruction.…

Photomultiplier tubes (PMTs) are widely used in particle and nuclear physics experiments. The reconstruction of PMT waveforms is a fundamental task in these experiments, where accurate extraction of photoelectron (PE) multiplicities and…

Photomultiplier tubes (PMTs) are a central component of neutrino telescopes such as IceCube and KM3NeT, and an accurate understanding and measurement of their properties is indispensable for improvements of these experiments. In this…

Photomultiplier tubes (PMTs) are widely used in neutrino and other experiments for the detection of weak light. To date PMTs are the most sensitive single photon detector per unit area. In addition to the quantum efficiency for photon…

Photomultiplier tubes (PMTs) are widely used in particle experiments for photon detection. PMT waveform analysis is crucial for high-precision measurements of the position and energy of incident particles in liquid scintillator (LS)…

The TRIDENT (Tropical Deep-sea Neutrino Telescope) experiment is a next-generation underwater neutrino observatory planned for deployment in the West Pacific Ocean, designed to detect astrophysical neutrinos through Cherenkov radiation. The…

In many particle physics experiments the data processing is based on the analysis of the digitized waveforms provided by the detector. While the waveform amplitude is usually correlated to the event energy, the shape may carry useful…

Since the early days of experimental particle physics photomultipliers (PMTs) have played an important role in the detector design. Thanks to their capability of fast photon counting, PMTs are extensively used in the new-generation of…

We present the design and characterization of a Cockcroft--Walton (CW) high-voltage (HV) system developed for deep-sea neutrino telescopes. The system provides independently adjustable bias voltages for 31 three-inch photomultiplier tubes…

The sensitivity to dark matter signals at neutrino experiments is fundamentally challenged by the neutrino rates, as they leave similar signatures in their detectors. As a way to improve the signal sensitivity, we investigate a dark matter…

Mass spectrometry is a widespread approach to work out what are the constituents of a material. Atoms and molecules are removed from the material and collected, and subsequently, a critical step is to infer their correct identities based…

Photomultiplier tubes (PMTs) are traditionally an integral part of large underground experiments as they measure the light emission from particle interactions within the enclosed detection media. The BUTTON experiment will utilise around…

Current and future neutrino and direct detection dark matter experiments hope to take advantage of improving technologies in photon detection. Many of these detectors are large, monolithic optical detectors that use relatively low-cost,…

The central institute of electronics (ZEA-2) in the Forschungszentrum Juelich (FZJ) has developed a system to scan the response of the photocathode of photomultiplier tubes (PMT). The PMT sits tight on a supporting structure, while a blue…

An analytical function is derived that exactly describes the amplification process due to a series of discrete, Poisson-like amplifications like those in a photo multiplier tube (PMT). A numerical recipe is provided that implements this…

The Multi-voltage Threshold (MVT) method, which samples the signal by certain reference voltages, has been well developed as being adopted in pre-clinical and clinical digital positron emission tomography(PET) system. To improve its energy…

In this paper, we present our approach to systematically measure numerous performance parameters of MCP-PMTs. The experimental setups, the analyses and selected results are discussed. Although the techniques used may be different in other…