相关论文: Manifold Optimization Methods for Hybrid beamformi…

Millimeter-wave (mm-wave) is a promising technique to enhance the network capacity and coverage of next-generation (5G) based on utilizing a great number of available spectrum resources in mobile communication. Improving the 5G network…

In this paper, we focus on the phenomenon of beam misalignment in Millimeter-wave (mmWave) multi-receiver communication systems, and propose robust hybrid precoding designs that alleviate the performance loss caused by this effect. We…

A novel dual-function radar communication (DFRC) system is proposed, that achieves high target resolution and high communication rate. It consists of a multiple-input multiple-output (MIMO) radar, where only a small number of antennas are…

A novel monostatic multiple-input multiple-output (MIMO) dual-function radar communication (DFRC) system is proposed, that uses the available bandwidth efficiently for both sensing and communication. The proposed system, referred to as…

In this paper, reconfigurable intelligent surface (RIS) is employed in a millimeter wave (mmWave) integrated sensing and communications (ISAC) system. To alleviate the multi-hop attenuation, the semi-self sensing RIS approach is adopted,…

Reconfigurable intelligent surface (RIS) assisted millimeter-wave (mmWave) communication systems relying on hybrid beamforming structures are capable of achieving high spectral efficiency at a low hardware complexity and low power…

In this letter, we investigate a robust beamforming problem for localization-aided millimeter wave (mmWave) communication systems. To handle this problem, we propose a novel restriction and relaxation (R&R) method. The proposed R&R method…

In this paper, we investigate a distributed multi-input multi-output and orthogonal frequency division multiplexing (MIMO-OFDM) dual-function radar-communication (DFRC) system, which enables simultaneous communication and sensing in…

The future wireless communications are expected to provide new use scenarios with emerging techniques. This paper focuses on vehicle to everything (V2X) network, where vehicles should cooperatively implement information obtaining, data…

In this work, we consider the design of hybrid analog-digital (HAD) multi-carrier MIMO-OFDM two-way relaying systems, where the relay station is equipped with a HAD amplify-and-forward architecture and every mobile station is equipped with…

The ability of Multiple-Input Multiple-Output (MIMO) radar systems to adapt waveforms across antennas allows flexibility in the transmit beampattern design. In cognitive radar, a popular cost function is to minimize the deviation against an…

Hybrid digital/analog architecture and low-resolution analog-to-digital/digital-to-analog converters (ADCs /DACs) are two low-cost implementations for large-scale millimeter wave (mmWave) systems. In this paper, we investigate the problem…

To efficiently utilize the wireless spectrum and save hardware costs, the fifth generation and beyond (B5G) wireless networks envisage integrated sensing and communications (ISAC) paradigms to jointly access the spectrum. In B5G systems,…

Direction-of-arrival (DOA) estimation is one of the most demanding tasks for the millimeter wave (mmWave) communication of massive multiple-input multiple-output (MIMO) systems with the hybrid beamforming (HBF) architecture. In this paper,…

In time-division duplexing (TDD) millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems, the reciprocity mismatch severely degrades the performance of the hybrid beamforming (HBF). In this work, to mitigate the…

Millimeter wave (mmWave) full-duplex (FD) is a promising technique for improving capacity by maximizing the utilization of both time and the rich mmWave frequency resources. Still, it has restrictions due to FD self-interference (SI) and…

Hybrid analog/digital precoding architectures can address the trade-off between achievable spectral efficiency and power consumption in large-scale MIMO systems. This makes it a promising candidate for millimeter wave systems, which require…

Integrated Sensing and Communication (ISAC) systems require efficient beamforming architectures to jointly support communication and sensing functionalities. To reduce hardware overhead, Hybrid Beamforming (HBF) has been widely studied and…

A novel modular extremely large-scale multiple-input-multiple-output (XL-MIMO) integrated sensing and communication (ISAC) framework is proposed in this paper. We consider a downlink ISAC scenario and exploit the modular array architecture…

In this paper, we propose a hybrid analog-digital beamforming architecture with resolution-adaptive ADCs for millimeter wave (mmWave) receivers with large antenna arrays. We adopt array response vectors for the analog combiners and derive…