相关论文: Impact of pre-patterned structures on features of …
The formation of self-organized laser induced periodic surface structures (LIPSS) in metals, semiconductors and dielectrics upon pulsed laser irradiation is a well-known phenomenon, receiving increased attention due to its huge…
In this paper the formation mechanisms of the femtosecond laser-induced periodic surface structures (LIPSS) are discussed. One of the most frequently-used theories explains the structures by interference between the incident laser beam and…
Formation of nanoscale laser-induced periodic surface structures on thin metal films (of the size of the optical penetration depth) is a yet unexplored area that is expected to open new routes for laser patterning and a wealth of exciting…
In this work, we focus on the fabrication of highly uniform laser-induced periodic surface structures (LIPSS) on bulk polycarbonate (PC) using 258 nm femtosecond laser pulses. A systematic approach was pursued to investigate the influence…
The accurate calculation of laser energy absorption during femto- or picosecond laser pulse experiments is very important for the description of the formation of periodic surface structures. On a rough material surface, a crack or a step…
Understanding the mechanisms and controlling the possibilities of surface nanostructuring is of crucial interest from fundamental and practical perspectives. Here we report a direct experimental observation of laser-induced periodic surface…
Laser induced periodic surface structures (LIPSS) are formed by multiple irradiation of femtosecond laser on a silicon target. In this paper, we focus and discuss the surface plasmon polariton mechanism by an analysis of transient…
The physical mechanisms of the laser-induced periodic surface structures (LIPSS) formation are studied in this paper for single-pulse irradiation regimes. The change in the LIPSS period with wavelength of incident laser radiation is…
Using different laser irradiation patterns to modify of silicon surface, it has been demonstrated that, at rather small overlapping between irradiation spots, highly regular laser-induced periodic surface structures (LIPSS) can be produced…
A comparative study is performed to explore the periodic structure formation upon intense femtosecond pulsed irradiation of dielectrics with radially and azimuthally polarised beams. Laser conditions have been selected appropriately to…
Femtosecond pulsed lasers have been widely used over the past decades for precise materials structuring at the micro- and nano- scales. In order, though, to realize efficient material processing and account for the formation of laser…
Irradiation of solid surfaces with high intensity, ultrashort laser pulses triggers a variety of secondary processes that can lead to the formation of transient and permanent structures over large range of length scales from mm down to the…
The formation of a new type of laser-induced periodic surface structures using a femtosecond pulsed laser is studied on the basis of the Sipe-Drude theory solved with a FDTD scheme. Our numerical results indicate the possibility of…
The presented study highlights the efficiency of employing a KrF excimer laser to create diverse types of periodic nanostructures (LIPSS - laser induced periodic surface structures) on polyether ether ketone (PEEK) and polyethylene…
The recently observed dependence of the periodic surface structures on the light polarization in the laser induced pattern formation is analyzed within a model where the polarization induces significant deviation the spatial distribution of…
The formation of permanent laser-induced periodic surface structures (LIPSS) on solid surfaces under impulsive laser irradiation above the damage threshold has been subject of extensive research. We demonstrate the formation of transient…
Thin Cr films 28-nm thick deposited on glass substrates were processed by scanning low-intensity femtosecond laser pulses with energy well below single-pulse damage threshold. Two types of laser-induced periodic surface structures (LIPSS)…
We show theoretically that an intense femtosecond optical pulse incident normally on a metal surface tends to decay into a pair of counter-propagating surface plasmon-polaritons (SPPs). The interference field heats the medium periodically,…
Formation of laser-induced periodic surface structures (LIPSS or ripples) was studied on a metallic surface of polished copper by using irradiation with multiple femtosecond laser pulses in different environmental conditions (air, water,…
By using numerical and analytical methods, we describe the generation of fine-scale lateral electromagnetic waves, called surface plasmon-polaritons (SPPs), on atomically thick, metamaterial conducting sheets in two spatial dimensions (2D).…