相关论文: Low cycle fatigue of a nickel based superalloy at …
This work is focused on the micromechanical modelling of the low cycle fatigue of the nickel based $\gamma/\gamma'$ superalloy AM1 at high temperature. The nature of the activated slip systems in the different types of channels of the…
A microstructure-based model is presented to predict the fatigue life of polycrystalline metallic alloys which present a bilinear Coffin-Manson relationship. The model is based in the determination of the maximum value of a fatigue…
Precipitation-strengthened alloys, such as Ni-base, Co-base and Fe-base superalloys, show the development of dendrite-like precipitates in the solid state during aging at near-$\gamma^{\prime}$ solvus temperatures. These features arise out…
Past models of stress-strain response under cyclic loading mainly rely on macroscopic equations which consider microstructure evolution indirectly or simply discard microstructure information. Modern materials science, on the other hand,…
The brittleness of an aluminide diffusion coating protecting a Ren\'e 125 Ni-based polycrystalline superalloy was investigated over a wide range of temperatures in its as-received and thermally aged form. Isothermal and thermal cycled aging…
Strain-controlled fatigue of Mg-1Mn-0.5Nd (wt.\%) alloy were studied by experiment and simulation. The microstructure was made up of a dispersion of strongly texture grains (13\%) embedded in a matrix of grains with a random texture. The…
The deformation and fatigue crack nucleation mechanisms were studied by means of slip trace analysis and secondary electron microscopy in a textured AZ31B-O Mg alloy subjected to fully-reversed cyclic deformation at two different cyclic…
Crack initiation governs high cycle fatigue life and is susceptible to microstructural details. While corresponding microstructure-sensitive models are available, their validation is difficult. We propose a validation framework where a…
The deformation behavior of single crystal and nanocrystalline nickel were studied using in situ micropillar compression experiments from quasi-static to high strain rates up to 10^3 s-1. Deformation occurred by dislocation slip activity in…
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge…
In this paper, two fatigue lifetime prediction models are tested on TiAl intermetallic using results from uniaxial low-cycle fatigue tests. Both assessments are based on dissipated energy but one of them considers a hydrostatic pressure…
A microstructure-based model that accounts for the effect of grain size has been developed to study the effect of grain size on the fatigue life of Inconel 718 alloys. The fatigue behavior of two alloys with different grain size was…
Nanocrystalline metals typically have high fatigue strengths, but low resistance to crack propagation. Amorphous intergranular films are disordered grain boundary complexions that have been shown to delay crack nucleation and slow crack…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
The deposition of one silicon monolayer on the silver (111) substrate in the temperature range 150-300$^\circ$C, gives rise to a mix of (4$\times$4), ($2\sqrt{3}\times 2\sqrt{3}$)R30$^\circ$ and ($\sqrt{13}\times\sqrt{13}$)R13.9$^\circ$…
The deformation mechanisms governing the cyclic stress-strain behaviour of a TiNi shape memory alloy were investigated in this work. To understand the development of these mechanisms during cyclic loading, three low-cycle fatigue tests were…
The fatigue properties of 930 nm-thick Au films and 1 {\mu}m-thick Au film with a Ti interlayer are systematically investigated. The dominant damage behaviors of 930 nm-thick Au films under dynamic bending cyclic loading changed from…
This paper presents a multi-scale modelling approach to investigate the underpinning mechanisms of microstructure-sensitive damage of single crystal Sn-3Ag-0.5Cu (wt%, SAC305) solder joints of a Ball Grid Array (BGA) board assembly subject…
Nanocrystalline metals are promising materials for wear-resistant applications due to their superior strength and hardness, but prior work has shown that cyclic loading can lead to coarsening. In this study, scratch wear tests were carried…
The accumulation of plastic deformation and flow localization in amorphous alloys under periodic shear are investigated using molecular dynamics simulations. We study a well-annealed binary mixture of one million atoms subjected to…