相关论文: Precipitation in lean Mg-Zn-Ca alloys
Kinetics of homogeneous nucleation and growth of copper precipitates under electron irradiation of Fe_{1-x}Cu_x alloys at concentrations x from 0.06 at.% to 0.4 at.% and temperatures T from 290 to 450C is studied using the kinetic Monte…
Zr and Sc precipitate in aluminum alloys to form the Al\_3Zr\_xSc\_{1-x} compound which, for low supersaturations of the solid solution, exhibits the L1\_2 structure. The aim of the present study is to model at an atomic scale the kinetics…
One usual way to strengthen a metal is to add alloying elements and to control the size and the density of the precipitates obtained. However, precipitation in multicomponent alloys can take complex pathways depending on the relative…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
We present a comprehensive study relating the nanostructure of Ge_0.95Mn_0.05 films to their magnetic properties. The formation of ferromagnetic nanometer sized inclusions in a defect free Ge matrix fabricated by low temperature molecular…
Intermetallic precipitates formed in heat-treated and aged Mg-Zn and Mg-Zn-Y alloys have been investigated via electron microscopy. Coarse spheroidal precipitates formed on deformation twin boundaries contained domains belonging to either…
The complexity and richness of phenomena governing alloy crystal growth can be unraveled by examining the three-dimensional atomic-level distribution of elements and impurities incorporated during growth. These species act as atomic…
The interaction between Mg edge basal dislocations and rod-shaped $\beta_1'$-MgZn$_2$ precipitates was studied by atomistic simulations using a new interatomic potential. The atomistic model was carefully built taking into account the…
Precipitates are main microstructural features to provide high temperature creep strength and radiation resistance in structural materials for fusion energy systems. However, the mechanisms of precipitate stability under irradiation in…
To assess long-term structural integrity under operational conditions in nuclear reactors, SS 316LN with varying nitrogen content is subjected to thermal aging for 20000 hours at 650{\deg}C. While the annealing twins and heterogeneous grain…
A high-throughput methodology is proposed, based on the combination of diffusion couples and advanced nanomechanical testing methods, to directly measure alloying effects on the critical resolved shear stress (CRSS) of individual…
The T91 grade and similar 9Cr tempered-martensitic steels (also known as ferritic-martensitic) are leading candidate structural alloys for fast fission nuclear and fusion power reactors. At low temperatures (300 to 400 $^\circ$C) neutron…
The high strength of structural aluminium alloys depends strongly on the controlled precipitation of specific intermetallic phases, whose identity and crystal structure can be difficult to predict. Here, we investigate the Al-Pt system,…
Understanding the composition evolution of grain boundaries and grain boundary precipitation at near-atomic scale in aluminum alloys is crucial to tailor mechanical properties and to increase resistance to corrosion and stress corrosion…
Magnesium alloys are emerging as promising alternatives to traditional orthopedic implant materials thanks to their biodegradability, biocompatibility, and impressive mechanical characteristics. However, their rapid in-vivo degradation…
This work describes a multidisciplinary research methodology for quantifying the size distribution of nanoscale precipitates in polycrystalline alloys. Complementary transmission electron microscopy (TEM) and small-angle x-ray scattering…
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys. Early stages of precipitation are particularly important from the fundamental…
The mechanical properties of Mg-Al alloys are greatly influenced by the complex intermetallic phase Mg$_{17}$Al$_{12}$, which is the most dominant precipitate found in this alloy system. The interaction of basal edge and 30$^\text{o}$…
We present the first study relating structural parameters of precipitate free Ge0.95Mn0.05 films to magnetisation data. Nanometer sized clusters - areas with increased Mn content on substitutional lattice sites compared to the host matrix -…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…