相关论文: Rainbow-link: Beam-Alignment-Free and Grant-Free m…
In this paper, we propose a sequential hybrid beamforming design for multi-link transmission over mmwave frequency bands. As a starting point, a baseline data communication link is established via traditional analog beamforming at both the…
In order to achieve terabits-per-second (Tbps) data rates in the sixth-generation (6G) mobile system, wireless communications are required to exploit the abundant spectrum in the millimeter-wave (mmWave) and terahertz (THz) bands. However,…
Designing and developing a millimetre-wave(mmWave) based mobile Radio Access Technology (RAT) in the 6-100 GHz frequency range is a fundamental component in the standardization of the new 5G radio interface, recently kicked off by 3GPP.…
Millimeter-wave (mmWave) networks offer the potential for high-speed data transfer and precise localization, leveraging large antenna arrays and extensive bandwidths. However, these networks are challenged by significant path loss and…
Due to the large bandwidth available, millimeter-Wave (mmWave) bands are considered a viable opportunity to significantly increase the data rate in cellular and wireless networks. Nevertheless, the need for beamforming and directional…
Ultra-reliability and low-latency are pivotal requirements of the new 6th generation of communication systems (xURLLC). Over the past years, to increase throughput, adaptive active antennas were introduced in advanced wireless…
Due to massive available spectrum in the millimeter wave (mmWave) bands, cellular systems in these frequencies may provides orders of magnitude greater capacity than networks in conventional lower frequency bands. However, due to high…
Owing to severe path loss and unreliable transmission over a long distance at higher frequency bands, we investigate the problem of path selection and rate allocation for multi-hop self-backhaul millimeter wave (mmWave) networks. Enabling…
In 5G networks, a Radio over Fiber architecture utilizing multicore fibers can be adopted for the transmission of mmwave signals feeding phased array antennas. The mmwave signals undergo phase shifts imposed by optical true time delay…
With the increasing demand of ultra-high-speed wireless communications and the existing low frequency band (e.g., sub-6GHz) becomes more and more crowded, millimeter-wave (mmWave) with large spectra available is considered as the most…
One of the main drivers for new waveforms in future 5G wireless communication systems is to handle efficiently the variety of traffic types and requirements. In this paper, we introduce a new random access within the standard acquisition…
Millimeter wave (mmWave) communications provide great potential for next-generation cellular networks to meet the demands of fast-growing mobile data traffic with plentiful spectrum available. However, in a mmWave cellular system, the…
The millimeter wave (mmWave) frequency band is seen as a key enabler of multi-gigabit wireless access in future cellular networks. In order to overcome the propagation challenges, mmWave systems use a large number of antenna elements both…
In next-generation communications, sub-6GHz and millimeter-wave (mmWave) links typically coexist, with the sub-6GHz link always active and the mmWave link active when high-rate transmission is required. Due to the spatial similarities…
To support faster and more efficient networks, mobile operators and service providers are bringing 5G millimeter wave (mmWave) networks indoors. However, due to their high directionality, mmWave links are extremely vulnerable to blockage by…
The exploitation of mm-wave bands is one of the key-enabler for 5G mobile radio networks. However, the introduction of mm-wave technologies in cellular networks is not straightforward due to harsh propagation conditions that limit the…
The directionality of millimeter-wave (mmWave) communications creates a significant challenge in serving fast-moving mobile terminals on, e.g., high-speed vehicles, trains, and UAVs. This challenge is exacerbated in mmWave systems using…
Maintaining reliable millimeter wave (mmWave) connections to many fast-moving mobiles is a key challenge in the theory and practice of 5G systems. In this paper, we develop a new algorithm that can jointly track the beam direction and…
An end-to-end fiber-based network holds the potential to provide multi-gigabit fixed access to end-users. However, deploying fiber access, especially in areas where fiber is non-existent, can be time-consuming and costly, resulting in…
Ultra-reliability and low-latency are two key components in 5G networks. In this letter, we investigate the problem of ultra-reliable and low-latency communication (URLLC) in millimeter wave (mmWave)-enabled massive multiple-input…