相关论文: Spacing effect on pool boiling performance of thre…
In the present study, a 1-dimensional model is proposed to estimate the pressure drop and heat transfer coefficient for flow boiling in a rectangular microchannel. The present work takes into account the pressure fluctuations caused due to…
Bubble growth, departure and sliding in low-pressure flow boiling has received considerable attention in the past. However, most applications of boiling heat transfer rely on high-pressure flow boiling, for which very little is known, as…
Flow boiling in microchannel heat sinks is an efficient way to dissipate high heat flux by utilizing the large surface-to-volume ratio and high latent heat. Previous studies of boiling heat transfer in microchannels mainly consider the…
Nucleate pool boiling is known for its exceptional heat transfer coefficients, with the use of cavities further improving bubble nucleation and heat transfer rate. To promote this heat transfer enhancement technique, a thorough…
In this work, physical dealloying was explored as a simple and green method to microstructure the surface of commercial brass for pool boiling heat transfer coefficient enhancement. Three samples were dealloyed for 0.5, 1 and 3 hours at 650…
Boiling is an extremely effective way to promote heat transfer from a hot surface to a liquid due to several mechanisms many of which are not understood in quantitative detail. An important component of the overall process is that the…
In this study, analysis of shell and tube heat exchanger (HE) is performed. Theory part on heat transfer, calculation of heat exchanger and general thermal and hydrological properties are described. Several models are developed and computed…
We numerically investigate turbulent Rayleigh-B\'enard convection with gas bubbles attached to the hot plate, mimicking a core feature in electrolysis, catalysis, or boiling. The existence of bubbles on the plate reduces the global heat…
A theoretical model is developed for the forced convection film boiling phenomenon over a heated sphere moving vertically downwards in the water. Unprecedented to the previous analytical studies, this model accounts for the buoyancy effects…
Nucleate boiling heat transfer (NBHT) from enhanced structures is an effective way to dissipate high heat flux. In the present study, the cavities behaviours for nucleation on roughened surface are numerically studied on the entire…
This study investigates the influence of heater material properties on nucleate pool boiling using a comprehensive simulation model. Copper and silicon oxide are selected as reference materials due to their properties as excellent and poor…
Three-orifice baffles equally spaced along a circular tube are investigated as a means for heat transfer enhancement under net, oscillatory and compound flows. An unprecedented, systematic analysis of the relative orientation of consecutive…
The field trap effect on the microcavity surface under the action of an electric field is not conducive to boiling heat transfer. This numerical study found that using conducting-insulating microcavity surfaces in an electric field removes…
The main objective of the present study is to investigate the effect of adding nanoparticles at different concentrations and sizes to boiling distilled water on the nucleate pool boiling heat transfer performance. The major studied…
Enhancing the efficiency of water electrolysis, which can be severely impacted by the nucleation and growth of bubbles, is key in the energy transition. In this combined experimental and numerical study, in-situ bubble evolution and…
Flow boiling within microchannels is an efficient heat removal mechanism by utilizing the latent heat of the fluid. Numerical simulations can resolve the small temporal and spatial scales of the vapor bubbles in the flow boiling process,…
The tube-in-tube helically coiled (TTHC) heat exchanger is preferred in the purifier of IHEP-ADS helium purification system. The position of an internal tube is usually eccentric in a TTHC heat exchanger in practice, while most TTHC heat…
This article presents a computational study of saturated flow boiling in non-circular microchannels. The unit channel of a multi-microchannel evaporator, consisting of the fluidic channel and surrounding evaporator walls, is emulated and…
We study slow-down effects for bubbles formed in a cosmological first-order phase transition (PT) focusing on deflagrations and hybrids, where the bubble wall is preceded by a shockwave of heated plasma. Slow-down has been observed in…
Laminar natural convection from two horizontally aligned isothermal cylinders in unconfined Power-law fluids has been investigated numerically. The effect of horizontal spacing (0<=(S/D)<=10) on both momentum and heat transfer…