相关论文: The Effect of Pore Structure in Flapping Wings on …

Porous bleed systems are a common technique to control shock-boundary layer interactions and/or supersonic boundary layers. However, the influence of various design parameters is still unknown. Even though bleed models are required to…

A porous fence can be used as a shelter to reduce wind-induced erosion and the dispersion of dust particles from sand piles. Although many experimental and numerical studies have been carried out to analyze the effect of a porous fence on…

Wind turbines operate in the atmospheric boundary layer, where they are exposed to the turbulent atmospheric flows. As the response time of wind turbine is typically in the range of seconds, they are affected by the small scale intermittent…

Competition between biological species in marine environments is affected by the motion of the surrounding fluid. An effective 2D compressibility can arise, for example, from the convergence and divergence of water masses at the depth at…

The flow around a symmetric aerofoil (NACA 0012) with an array of flexible flaplets attached to the trailing edge has been investigated at Reynolds numbers of 100,000 - 150,000 by using High-Speed Time-Resolved Particle Image Velocimetry…

Direct numerical simulations are used to elucidate the interplay of wettability and fluid viscosities on immiscible fluid displacements in a heterogeneous porous medium.We classify the flow regimes based using qualitative and quantitative…

Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can…

High-mass microquasar jets propagate under the effect of the wind from the companion star, and the orbital motion of the binary system. The stellar wind and the orbit may be dominant factors determining the jet properties beyond the binary…

We present 3-D numerical hydrodynamical simulations of precessing supersonic heavy jets to explore how well they serve as a model for generating molecular outflows from Young Stellar Objects. The dynamics are studied with a number of high…

This study investigates the effect of surface dimples on the unsteady aerodynamics of a National Advisory Committee for Aeronautics airfoil (NACA0012) at a chord-based Reynolds numbers of $Re_c = 5300$ and $10{,}000$ using direct numerical…

One of the motivations for exploring flapping-wing aerial robotic systems is to seek energy reduction, by maintaining manoeuvrability, compared to conventional unmanned aerial systems. A Flapping Wing Flying Robot (FWFR) can glide in…

A corrugated structure, rather than a smooth surface, is a characteristic feature of insect wings (e.g., dragonfly wings), which enhances their aerodynamic performance at low Reynolds numbers ($Re \simeq O(10^3)$). However, the mechanisms…

We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of…

We investigate the dynamics and the stability of the incompressible flow past a corrugated dragonfly-inspired airfoil in the two-dimensional (2D) $\alpha-Re$ parameter space, where $\alpha$ is the angle of attack and $Re$ is the Reynolds…

We study the influence of the boundary conditions at the solid liquid interface on diffusion in a confined fluid. Using an hydrodynamic approach, we compute numerical estimates for the diffusion of a particle confined between two planes.…

The intakes of air-breathing high-speed flying vehicles produce a large share of the thrust propulsion. Furthermore, the propulsion performance of these engines increases when the single-ramp intake is replaced with a multiple-ramps intake.…

We use confocal microscopy to directly visualize the spatial fluctuations in fluid flow through a three-dimensional porous medium. We find that the velocity magnitudes and the velocity components both along and transverse to the imposed…

Tail bending associated with maneuvering flight of insects is a known phenomenon although there are only a few studies which analyze and quantify the effects and benefits of body configuration changes. We hypothesized that these…

During the hydraulically induced compaction of a granular layer fracture patterns arise. In numerical simulations we study how these patterns depend on the gas properties as well as on the properties of the porous medium. In particular the…

This article experimentally investigates the exit dynamics of two different spheres i.e. a smooth sphere and a sphere with dimples at a constant speed. Employing high-speed experimental observations, the study investigates the key…