相关论文: A New Dynamic Optimal M2M RF interface setting in …

With the increasing number of Internet of Things (IoT) devices, Machine Type Communication (MTC) has become an important use case of the Fifth Generation (5G) communication systems. Since MTC devices are mostly disconnected from Base…

Random access schemes in modern wireless communications are generally based on the framed-ALOHA (f-ALOHA), which can be optimized by flexibly organizing devices' transmission and re-transmission. However, this optimization is generally…

Wireless Mesh Networks improve their capacities by equipping mesh nodes with multi-radios tuned to non-overlapping channels. Hence the data forwarding between two nodes has multiple selections of links and the bandwidth between the pair of…

OWC has been considered as a key enabling technology to unlock unprecedented speeds of communication, supporting high demands of data traffic. In this paper, infrared lasers are used as optical transmitters operating in an indoor…

As an enhanced version of massive machine-type communication in 5G, massive communication has emerged as one of the six usage scenarios anticipated for 6G, owing to its potential in industrial internet-of-things and smart metering. Driven…

A novel framework of reconfigurable intelligent surfaces (RISs)-enhanced indoor wireless networks is proposed, where an RIS mounted on the robot is invoked to enable mobility of the RIS and enhance the service quality for mobile users.…

This article investigates the energy efficiency issue in non-orthogonal multiple access (NOMA)-enhanced Internet-of-Things (IoT) networks, where a mobile unmanned aerial vehicle (UAV) is exploited as a flying base station to collect data…

Resource allocation is a fundamental problem in Industrial Internet of Things (IIoT) systems, in which devices work together under limited communication bandwidth to complete diverse tasks. This paper proposes a communication-efficient…

Blockage due to obstacles in millimeter wave (mmWave) device to device (D2D) communication is a prominent problem due to their severe penetration losses. Potential user equipments (UEs) in vicinity of the source UE must be explored in order…

Fog nodes in the vicinity of IoT devices are promising to provision low latency services by offloading tasks from IoT devices to them. Mobile IoT is composed by mobile IoT devices such as vehicles, wearable devices and smartphones. Owing to…

In order to deal with the recent rapid increase in Internet traffic, a transmission technology is required to enable the efficient use of the optical fiber spectrum while offering flexibility in network bandwidth. To meet these challenges,…

This paper investigates the simultaneous wireless information and energy transfer for the non-regenerative multipleinput multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) relaying system. By considering two practical…

The current random access (RA) allocation techniques suffer from congestion and high signaling overhead while serving massive machine type communication (mMTC) applications. To this end, 3GPP introduced the need to use fast uplink grant…

In this paper, we consider a bidirectional relay network with half-duplex nodes and block fading where the nodes transmit with a fixed transmission rate. Thereby, user 1 and user 2 exchange information only via a relay node, i.e., a direct…

LoRaWAN is a compelling low-cost solution for large-scale indoor Internet of Things (IoT) data backhaul, owing to its strong penetration capability and low power consumption. However, its default pure ALOHA access mechanism leads to severe…

This article introduces a new method to improve the dependability of millimeter-wave (mmWave) and terahertz (THz) network services in dynamic outdoor environments. In these settings, line-of-sight (LoS) connections are easily interrupted by…

A secure downlink transmission system which is exposed to multiple eavesdroppers and is appropriate for Internet of Things (IoT) applications is considered. A worst case scenario is assumed, in the sense that, in order to enhance their…

As an emerging technology, digital twin (DT) can provide real-time status and dynamic topology mapping for Internet of Things (IoT) devices. However, DT and its implementation within industrial IoT networks necessitates substantial,…

In this paper, we propose a joint dynamic power control and user pairing algorithm for power-efficient and low-latency hybrid multiple access systems. In a hybrid multiple access system, user pairing determines whether the transmitter…

Remote state estimation, where many sensors send their measurements of distributed dynamic plants to a remote estimator over shared wireless resources, is essential for mission-critical applications of Industry 4.0. Most of the existing…