相关论文: New design approach of Front-End Electronics for h…

Multi-gap RPC prototypes with readout on a multi-strip electrode were developed for the small polar angle region of the CBM-TOF subdetector, the most demanding zone in terms of granularity and counting rate. The prototypes are based on low…

This proceeding provides an expanded overview of the Fast Interaction Trigger (FIT) system performance, focusing on new developments such as the prospective integration of the ALICE Low-Level Front-End Device (ALFRED) into the Detector…

Constant-envelope signals are widely used in mobile edge applications and wireless communication systems for their hardware-friendly design, energy efficiency, and reliability. However, reliable detection with simple, power-efficient…

The central detector in the MuSun experiment is a pad-plane time projection ionization chamber that operates without gas amplification in deuterium at 31 K; it is used to measure the rate of the muon capture process $\mu^- + d \rightarrow n…

In this paper, a definition of the gain and added noise of impedance matching networks for scanning microwave microscopy is given. This definition can be used to compare different impedance matching techniques independently of the…

We present an automated design procedure for the rapid realization of wideband millimeter-wave lens antennas. The design method is based upon the creation of a library of matched unit-cells which comprise wideband impedance matching…

The \textit{KArlsruhe TRItium Neutrino} (KATRIN) experiment aims to measure the neutrino mass with a sensitivity of \SI{0.2}{\electronvolt} (\SI{90}{\percent} CL). This will be achieved by a precision measurement of the endpoint region of…

The purpose of this study was to show how advanced concepts of compact, lossless and "Time Of Flight" (TOF) capable electronics similar to those foreseen for the LHC and ILC experiments could be fairly and easily transferred to the medical…

This paper presents a model for detecting high-impedance faults (HIFs) using parameter error modeling and a two-step per-phase weighted least squares state estimation (SE) process. The proposed scheme leverages the use of phasor measurement…

Achieving high quantum efficiency (QE) with low dark count is essential for highly sensitive photodetectors (PDs), including single photon avalanche detectors (SPADs). However, high QE requires a thicker absorber region, which leads to high…

Picosecond-level timing will be an important component of the next generation of particle physics detectors. The ability to add a 4$^{th}$ dimension to our measurements will help address the increasing complexity of events at hadron…

This paper presents a small-area monolithic pixel detector ASIC designed in 130 nm SiGe BiCMOS technology for the upgrade of the pre-shower detector of the FASER experiment at CERN. The purpose of this prototype is to study the integration…

Massive MIMO (Multiple-Input Multiple-Output) is a key enabler for 5G and future wireless systems, boosting channel capacity, energy efficiency, and spectral efficiency. However, high power consumption and hardware costs of…

At the China Jinping Underground Laboratory, the Particle AND Astrophysical Xenon phase IV (PandaX-4ton) in planning is a dark matter direct detection experiment with dual-phase xenon detector as an upgrade of the second phase of the…

In this paper we describe the performance of a prototype of the High Angle Time Projection Chambers (HA-TPCs) that are being produced for the Near Detector (ND280) upgrade of the T2K experiment. The two HA-TPCs of ND280 will be instrumented…

This paper considers optimal input design when the intended use of the identified model is to construct a feed-forward controller based on measurable disturbances. The objective is to find a minimum power excitation signal to be used in…

The detector of TRopIcal DEep-sea Neutrino Telescope (TRIDENT) will use large-area silicon photomultiplier (SiPM) arrays combined with photomultiplier tubes to boost photon detection efficiency and pointing capability. An…

Time-tagging units and coincidence detectors are used in many scientific research fields. The required timing resolution and number of input channels are varying, but some emerging experiments in the field of quantum optics require up to 32…

An emerging device architecture for infrared imaging is the curved focal-plane array which benefits from several optical advantages over the traditional flat design. However, the curving process introduces additional strain in the active…

Following the Future Circular Collider (FCC) Feasibility Study completion, the impedance model for the FCC-ee High-Energy Booster (HEB) has been significantly expanded beyond the initial copper vacuum pipe resistive wall analysis. This…