相关论文: A single formula for the law of the wall and its a…
We conducted WMLES to examine the performance of a simple and widely used ODE-based equilibrium wall model in a spatially-developing 3D TBL inside a bent square duct (Schwarz and Bradshaw 1994) and 3D separated flows behind a skewed bump…
A uniform representation of the mean turbulent velocity profile in the sum of a wall function and a wake function is applied to an open channel, quantitatively determining its components. The open channel is thus found to coherently fit in…
Computational fluid dynamics (CFD) is a useful tool for prediction of turbulence in aerodynamic and biomedical applications. The choice of appropriate turbulence models is key to reaching accurate predictions. The present investigation…
The majority of practical flows, particularly those flows in applications of importance to transport, distribution and climate, are turbulent and as a result experience complex three-dimensional motion with increased drag compared with the…
Simulating massively separated turbulent flows over bodies is one of the major applications for large-eddy simulation (LES). In the current work, we propose a machine-learning-based LES framework for the rapid simulation of turbulent flows…
Turbulent flows have high requirements for very fine meshes near the boundary to ensure accuracy. In the context of topology optimization (TO), such fine meshes become unrealistic and common approaches are hampered by low accuracy and…
Well-resolved direct numerical simulations (DNSs) have been performed of the flow in a smooth circular pipe of radius $R$ and axial length $10\pi R$ at friction Reynolds numbers up to $Re_\tau=5200$. Various turbulence statistics are…
A new velocity scale is derived that yields a Reynolds number independent profile for the streamwise turbulent fluctuations in the near-wall region of wall bounded flows for $y^+<25$. The scaling demonstrates the important role played by…
We investigate statistics of large-scale structures from large-eddy simulation (LES) of turbulent channel flow at friction Reynolds numbers $Re_\tau = 2 {\rm k}$ and $200 {\rm k}$. To properly capture the behaviour of large-scale…
The large structures in the outer layer of turbulent wall flows are of great physical importance, because they contain a substantial fraction of the streamwise kinetic energy and of the Reynolds stresses. Nevertheless, the organization of…
The interaction between an incident shock wave and a Mach-6 undisturbed hypersonic laminar boundary layer over a cold wall is addressed using direct numerical simulations (DNS) and wall-modeled large-eddy simulations (WMLES) at different…
A system of simplified equations is proposed to govern the feedback interactions of large-scale flows present in laminar-turbulent patterns of transitional wall-bounded flows, with small-scale Reynolds stresses generated by the…
Very recently, a defect model which depicts the growth tendency of the near-wall peak of the streamwise turbulence intensity has been developed (Chen $\&$ Sreenivasan, J. Fluid Mech. (2021), vol.908, R3). Based on the finiteness of the…
We study the numerical errors of large-eddy simulation (LES) in isotropic and wall-bounded turbulence. A direct-numerical-simulation (DNS)-aided LES formulation, where the subgrid-scale (SGS) term of the LES is computed by using filtered…
Generalized wall-functions in application to high-Reynolds-number turbulence models are derived. The wall-functions are based on transfer of a boundary condition from a wall to some intermediate boundary near the wall (usually the first…
Wall-models are essential for enabling large-eddy simulations (LESs) of realistic problems at high Reynolds numbers. The present study is focused on approaches that directly model the wall shear stress, specifically on filling the gap…
In this work, a non-equilibrium wall model is proposed for the prediction of turbulent flows experiencing adverse pressure gradients, including separated flow regimes. The mean-flow nonequilibrium is identified by comparing two…
We investigate the error scaling and computational cost of wall-modeled large-eddy simulation (WMLES) for external aerodynamic applications. The NASA Juncture Flow is used as representative of an aircraft with trailing-edge smooth-body…
We present a framework based on the generalized lattice-Boltzmann equation using multiple relaxation times with forcing term for eddy capturing simulation of wall bounded turbulent flows. Due to its flexibility in using disparate relaxation…
Turbulence remains an unsolved multidisciplinary science problem. As one of the most well-known examples in turbulent flows, knowledge of the logarithmic mean velocity profile (MVP), so called the log law of the wall, plays an important…