相关论文: On the Dynamics of the Jet Wiping Process: Numeric…
We investigate the dynamics of a gas jet impinging on a thin liquid film. This configuration is relevant to the jet-wiping process and is unstable. In particular, we complement previous works that focused on the wiping of liquids with low…
The jet wiping process is a cost-effective coating technique that uses impinging gas jets to control the thickness of a liquid layer dragged along a moving strip. This process is fundamental in various coating industries (mainly in hot-dip…
In this paper, we present a detailed example of numerical study of flm formation in the context of metal coating. Subsequently we simulate wiping of the film by a planar jet. The simulations have been performed using Basilisk, a…
We study the deformation and dewetting of liquid films under impinging gas jets using experimental, analytical and numerical techniques. We first derive a reduced-order model (a thin-film equation) based on the long-wave assumption and on…
In this fluid dynamics video, results from high fidelity numerical simulations are presented, which have been carried out to study the flow and droplet dynamics of liquid sheets formed by two impinging jets. A three-dimensional…
Metallic coatings are used to enhance the durability of metal surfaces by protecting them from corrosion. These protective layers are typically deposited in a fluid state via a liquid film. Controlling instabilities in the liquid film is…
Current design constraints have encouraged the studies of aeroacoustic fields around compressible jet flows. The present work addresses the numerical study of unsteady turbulent jet flows as a preparation for future aeroacoustic analyses of…
We study the effects of a controlled gas flow on the dynamics of electrified jets in the electrospinning process. The main idea is to model the air drag effects of the gas flow by using a non-linear Langevin-like approach. The model is…
We monitor the evaporation of a volatile liquid (ethanol) from an inkjet-printed liquid film, consisting of a mixture of ethanol and ethylene glycol. Interferometric video imaging technology is used for recording 2D vapor concentration…
Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid…
The flow patterns created by a coherent horizontal liquid jet impinging on a vertical wall atmoderate flow rates (jet flowrates 0.5-4.0 L min-1, jet velocities 2.6-21 m s-1) are studied withwater on glass, polypropylene and…
The rupture of a liquid film due to co-flowing turbulent shear flows in the gas phase is studied using a volume-of-fluid method. To simulate this multiphase problem, we use a simplified numerical setup where the liquid film is 'sandwiched'…
Breakup of a liquid jet in a high speed gaseous crossflow finds wide range of engineering and technological applications, especially in the combustors of the gas turbine engines in aerospace industry. In this study, we present…
When a solid plate is withdrawn from a partially wetting liquid, a liquid layer dewets the moving substrate. High-speed imaging reveals alternating thin and thick regions in the entrained layer in the transverse direction at steady state.…
Recent observations as well as theoretical studies of YSO jets suggest the presence of two steady components: a disk wind type outflow needed to explain the observed high mass loss rates and a stellar wind type outflow probably accounting…
We present results of large eddy simulations of a cavitating nozzle flow and injection into gas, investigating the interactions of cavitation in the nozzle, primary jet breakup, mass-flow rates, and gas entrainment. During strong…
We experimentally study the aeroelastic instability boundaries and three-dimensional vortex dynamics of pitching swept wings, with the sweep angle ranging from 0 to 25 degrees. The structural dynamics of the wings are simulated using a…
Current development of micro-scale technologies increases the interest to viscous flows with low and moderate Reynolds numbers. This work theoretically studies the entrainment flow of a viscous jet emerging from a plane wall into a half…
As the liquid jet plunges into a free surface, significant air is entrained into the water and forms air pockets. These air pockets eventually break up into small bubbles, which travel downstream to form a bubbly wake. To better understand…
In this paper, we have experimentally, numerically and theoretically investigated the water jet cleaning process. Very high speed water jets (~80-200 m/s) are typically used in such cleaning operations. These jets diffuse in the surrounding…