相关论文: Precompensation of 3D field distortions in remote …
The technique of remote refocusing is used in optical microscopy to provide rapid axial scanning without mechanically perturbing the sample and in techniques such as oblique plane microscopy that build on remote refocusing to image a tilted…
Wide field-of-view (FOV) cameras, which capture a larger scene area than narrow FOV cameras, are used in many applications including 3D reconstruction, autonomous driving, and video surveillance. However, wide-angle images contain…
High-throughput 2D and 3D scanning electron microscopy, which relies on automation and dependable control algorithms, requires high image quality with minimal human intervention. Classical focus and astigmatism correction algorithms attempt…
Most algorithms in 3D computer vision rely on the pinhole camera model because of its simplicity, whereas virtually all imaging devices introduce certain amount of nonlinear distortion, where the radial distortion is the most severe part.…
Off-axis parabolic mirrors (OAPs) are occasionally desirable for specialized applications, but are known to introduce field-dependent astigmatic aberrations. In an experiment where optical tweezers are formed by OAPs, another OAP is added…
Two-Photon Laser-Scanning Microscopy is a powerful tool for exploring biological structure and function because of its ability to optically section through a sample with a tight focus. While it is possible to obtain 3D image stacks by…
Nonlinear lens distortion rectification is a common first step in image processing applications where the assumption of a linear camera model is essential. For rectifying the lens distortion, forward distortion model needs to be known.…
Acousto-optic deflectors (AODs) are widely used across physics, microscopy, neuroscience, and laser engineering, providing fast, precise, and non-mechanical control of light. While conventional AODs naturally support multiplexing in one and…
Imaging specimens over large scales and with a sub-micron resolution is instrumental to biomedical research. Yet, the number of pixels to form such an image usually exceeds the number of pixels provided by conventional cameras. While most…
We propose a novel method for non-rigid 3-D motion correction of orthogonally raster-scanned optical coherence tomography angiography volumes. This is the first approach that aligns predominantly axial structural features like retinal…
A simple method of constructing the 3D surface of non-transparent micro-objects by extending the depth-of-field on the whole attainable surface is presented. The series of images of a sample are recorded by the sequential movement of the…
Volumetric optical microscopy using non-diffracting beams enables rapid imaging of 3D volumes by projecting them axially to 2D images but lacks crucial depth information. Addressing this, we introduce MicroDiffusion, a pioneering tool…
Autofocus (AF) methods are extensively used in biomicroscopy, for example to acquire timelapses, where the imaged objects tend to drift out of focus. AD algorithms determine an optimal distance by which to move the sample back into the…
We present a deep learning driven computational approach to overcome the limitations of self-interference digital holography that imposed by inferior axial imaging performances. We demonstrate a 3D deep neural network model can…
This paper presents a blind detection and compensation technique for camera lens geometric distortions. The lens distortion introduces higher-order correlations in the frequency domain and in turn it can be detected using higher-order…
Three-photon (3-P) fluorescence microscopy enables deep in vivo imaging with subcellular resolution, but its performance is fundamentally constrained by the maximum permissible laser power required to avoid tissue heating and photodamage.…
Motion during image acquisition can cause image degradation in all medical imaging modalities. This is particularly relevant in 2-D ultrasound imaging, since out-of-plane motion can only be compensated for movements smaller than elevational…
We demonstrate a new versatile method for 3D super-resolution microscopy by using a deformable mirror to shape the point spread function of our microscope in a continuous and controllable way. We apply this for 3D STORM imaging of…
Multifocal plane microscopy (MUM) allows three dimensional objects to be imaged in a single camera frame. Our approach uses dual orthogonal diffraction phase gratings with a quadratic distortion of the lines to apply defocus to the first…
Accurate camera calibration is a fundamental task for 3D perception, especially when dealing with real-world, in-the-wild environments where complex optical distortions are common. Existing methods often rely on pre-rectified images or…