相关论文: Yield strength insensitivity in a dual-phase high …
The mechanical properties and microstructural evolution of a medium-entropy alloy Co$_{17.5}$Cr$_{12.5}$Fe$_{55}$Ni$_{10}$Mo$_{5}$ (at%) in a low temperature range (including the record low temperatures region down to 0.5 K) were…
High entropy alloys (HEAs) have attracted substantial interest in recent years. Thus far, most investigations have focused on their applications as structural materials rather than functional materials. In this paper, we show that…
The High Nitrogen Martensitic Stainless Steel (HNMS) was subjected to three different austenitizing cycles of 1050$^\circ$C, 1075$^\circ$C and 1100$^\circ$C followed by subzero treatment at -70$^\circ$C. The fraction of retained austenite…
In this work, we investigate the sensitivity of the microstructure and mechanical properties of an ultrafast heat treated low carbon-steel to the peak temperature. In all studied cases, the steel was heated within the intercritical…
Controlling microstructure in fusion-based metal additive manufacturing (AM) remains a challenge due to numerous parameters directly impacting solidification conditions. Multiprincipal element alloys (MPEAs) offer a vast compositional…
We report the magnetic properties, electrical resistivity, and Vickers microhardness of as-cast and annealed high-entropy alloys (HEAs) FeCoNiPd and FeCoNiPt with the face-centered cubic structure. The heat treatment at 800 $^{\circ}$C does…
At temperatures well below their glass transition, the deformation properties of bulk metallic glasses are characterised by a sharp transition from elasticity to plasticity, a reproducible yield stress, and an approximately linear decrease…
A novel medium Mn steel of composition Fe-12Mn-4.8Al-2Si-0.32C-0.3V was manufactured with 1.09 GPa yield strength, 1.26 GPa tensile strength and 54% elongation. The thermomechanical process route was designed to be industrially translatable…
Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…
Traditionally, increasing compositional complexity and chemical diversity of high entropy alloy ceramics whilst maintaining a stable single-phase solid solution has been a primary design strategy for the development of new ceramics.…
The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe…
A FePd alloy was nanostructured by severe plastic deformation following two different routes: ordered and disordered states were processed by high pressure torsion (HPT). A grain size in a range of 50 to 150 nm is obtained in both cases.…
Superplastic behavior of ultrafine-grained (UFG) Al-6Mg-0.12Sc-0.10Zr-0.1X alloys, where X = Yb (Alloy #1-Yb), Er (Alloy #2-Er), and Hf (Alloy #3-Hf), has been studied. The total content of Sc, Zr, Yb, Er, Hf in the alloys was 0.32 wt.%…
This work gives insights into processing and characterisation of bulk nanocrystalline FeCr materials. The investigated FeCr alloys, consisting of 30, 50 and 70 at.% ferromagnetic Fe and remaining anti-ferromagnetic Cr, are processed by arc…
Cobalt-free high-entropy alloys (HEAs) have garnered interest for nuclear structural applications due to their good mechanical performance, thermal stability, and resistance to radiation-induced degradation, while avoiding long-lived Co…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
Single-phase, multi-elements (three or more) with high concentrations show exceptional tensile strength up to ~ 0.8-1.2 GPa. However, they possess a very low 0.2% yield strength (YS), i.e., they can be permanently deformed at very…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
In situ neutron diffraction of the uniaxial tension test was used to study the effect of the surrounding matrix microstructure on the mechanical stability of retained austenite in high-carbon bearing steels. Comparing the samples with…
Damage-tolerance can be an elusive characteristic of structural materials requiring both high strength and ductility, properties that are often mutually exclusive. High-entropy alloys are of interest in this regard. Specifically, the…