相关论文: Cognitive-Driven Optimization of Sparse Array Tran…
In conventional colocated multiple-input multiple-output (MIMO) radars, practical waveform constraints including peak-to-average power ratio, constant or bounded modulus lead to a significant performance reduction of transmit beampattern,…
Multiple-input multiple-output (MIMO) radar has several advantages with respect to the traditional radar array systems in terms of performance and flexibility. However, in order to achieve high angular resolution, a MIMO radar requires a…
This paper demonstrates the implementation and validation of a microwave testbed for directionally modulated transmission. Directional modulation enables multiple communication and/or radar signals to be transmitted in multiple directions…
This paper studies hybrid beamforming for active sensing applications, such as millimeter-wave or ultrasound imaging. Hybrid beamforming can substantially lower the cost and power consumption of fully digital sensor arrays by reducing the…
A cognitive radar adapts the transmit waveform in response to changes in the radar and target environment. In this work, we analyze the recently proposed sub-Nyquist cognitive radar wherein the total transmit power in a multi-band cognitive…
A MIMO radar system is proposed for obtaining angle and Doppler information on potential targets. Transmitters and receivers are nodes of a small scale wireless network and are assumed to be randomly scattered on a disk. The transmit nodes…
Designing a cognitive radar system capable of adapting its parameters is challenging, particularly when tasked with tracking a ballistic missile throughout its entire flight. In this work, we focus on proposing adaptive algorithms that…
Millimeter wave (mmWave) communication, utilizing beamforming techniques to address the inherent path loss limitation, is considered as one of the key technologies to support ever increasing high throughput and low latency demands of…
Conventional active array radars often jointly design the transmit and receive beamforming for effectively suppressing interferences. To further promote the interference suppression performance, this paper introduces a reconfigurable…
The goal of this chapter is to review the recent work and advances in the area of space-time beamforming algorithms and their application to radar systems. These systems include phased-array \cite{melvin} and multi-input multi-output (MIMO)…
Channel state information (CSI) feedback is necessary for the frequency division duplexing (FDD) multiple input multiple output (MIMO) systems due to the channel non-reciprocity. With the help of deep learning, many works have succeeded in…
Multiple-input multiple-output (MIMO) systems are well suited for millimeter-wave (mmWave) wireless communications where large antenna arrays can be integrated in small form factors due to tiny wavelengths, thereby providing high array…
The problem addressed in this study is how to design and test compact antenna arrays for portable Mulitple-Input Multiple-Output (MIMO) transceivers. Mutual coupling in an antenna array affects signal correlation and array radiation…
In this paper, we investigate the problem of jointly optimizing the waveform covariance matrix and the antenna position vector for multiple-input-multiple-output (MIMO) radar systems to approximate a desired transmit beampattern as well as…
Sparse array designs have focused mostly on angular resolution, peak sidelobe level and directivity factor of virtual arrays for multiple-input multiple-output (MIMO) radar. The notion of the MIMO radar virtual array is based on the direct…
This paper presents a novel adaptive reduced-rank multi-input-multi-output (MIMO) decision feedback equalization structure based on joint iterative optimization of adaptive estimators. The novel reduced-rank equalization structure consists…
In millimeter-wave communications, multiple-input-multiple-output (MIMO) systems use large antenna arrays to achieve high gain and spectral efficiency. These massive MIMO systems employ hybrid beamformers to reduce power consumption…
In a typical MIMO radar scenario, transmit nodes transmit orthogonal waveforms, while each receive node performs matched filtering with the known set of transmit waveforms, and forwards the results to the fusion center. Based on the data it…
In this paper, we propose multi-input multi-output (MIMO) beamforming designs towards joint radar sensing and multi-user communications. We employ the Cram\'er-Rao bound (CRB) as a performance metric of target estimation, under both point…
We address the problem of designing a transmit beampattern for multiple-input multiple-output (MIMO) radar considering co-existence with wireless communication systems. The designed beampattern is able to manage the transmit energy in…