相关论文: Assessment of Soot Formation Models in Lifted Ethy…
The present work is aimed at examining the ability of different models in predicting soot formation in Delft flame III, which is a non-premixed pilot stabilized natural gas flame. The turbulence-chemistry interactions are modeled using a…
Soot formation in Delft flame III, a pilot stabilized turbulent diffusion flame burning natural gas/air, is investigated using ANSYS FLUENT by considering two different approaches for soot inception. In the first approach soot inception is…
This work presents a numerical investigation of soot formation in the Cambridge lab-scale gas turbine combustor. Large-eddy simulations (LES) of a swirl-stabilized ethylene flame are performed using the flamelet generated manifold method…
This work presents a numerical study of a diffusion flame in a reacting, two-dimensional, turbulent, viscous, multi-component, compressible mixing layer subject to a large favorable streamwise pressure gradient. The boundary-layer equations…
Alternative synthetic fuels can be produced by renewable energy sources and represent a potential route for solving long-term energy storage. Among them, oxygenated fuels have the advantage of significantly reducing pollutant emissions and…
A numerical study of the effects of air dilution on soot formation and particle dynamics in a lab-scale rich-quench-lean (RQL) combustor is presented using large-eddy simulations (LES) with tabulated chemistry. The modelling approach…
This study presents a systematic analysis of the capabilities of a flamelet model based on Flamelet Generated Manifolds (FGM) to reproduce preferential diffusion effects in partially premixed hydrogen flames. Detailed transport effects are…
The mixing process of multiple jets of liquefied petroleum gas and air in a diffusion flame is numerically analysed. The case study considers a four-port array burner where the fuel is injected by four peripheral nozzles and mixed with the…
Ultra-lean premixed hydrogen combustion is a possible solution to decarbonize industry, while limiting flame temperatures and thus nitrous oxide emissions. These lean hydrogen/air flames experience strong preferential diffusion effects,…
Flamelet-based methods are extensively used in modeling turbulent hydrocarbon flames. However, these models have yet to be established for (lean) premixed hydrogen flames. While flamelet models exist for laminar thermo-diffusively unstable…
The present work focuses on the large eddy simulation (LES) and the study of turbulent dilute methanol spray flames in vitiated coflow using the secondary oxidizer Flamelet Generated Model (FGM). The modified FGM model uses an additional…
Large-eddy simulations (LES) of a planar turbulent lean hydrogen-air jet flame at Re = 11000 are performed using a tabulated flamelet model based on mixture-averaged diffusion that incorporates detailed transport, including differential and…
Numerical modeling of turbulent spray combustion provides a promising tool for advanced engine design. In spray flames, the droplet evaporation not only reduces the ambient gas temperature, but also influences flame structure by generating…
A turbulent side-wall quenching (SWQ) flame in a fully developed channel flow is studied using Large-Eddy Simulation (LES) with a tabulated chemistry approach. Three different flamelet manifolds with increasing levels of complexity are…
Liquid ammonia combustion can be enhanced by co-firing with small molecular fuels such as methane, and liquid ammonia will undergo flash evaporation due to its relatively low saturation pressure. These characteristics, involving the…
Distributed combustion, often associated with the low-oxygen condition, offers ultra-low NOX emission. However, it was recently achieved without combustion air dilution or internal flue gas recirculation, using a distinct approach called…
Preferential diffusion plays an important role especially in hydrogen flames. Flame stretch significantly affects the flame structure and induces preferential diffusion. A problematic phenomenon occurring in real combustion devices is…
The present work reports on the numerical investigation of NOx in three turbulent piloted diffusion flames of different levels of extinction. The study involves two-dimensional axisymmetric modeling of combustion in these flames with fairly…
This paper presents an experimental methodology to measure the height of the flame using convolution image processing and statistical analysis. The experimental setup employs a burner with four circularly arranged nozzles. Six different…
Tabulated chemistry methods are a well-known strategy to efficiently store the flows thermochemical properties. In particular, the Flamelet-Generated Manifold (FGM) is a widely used technique that generates the database with a small number…