相关论文: Optimization of the high-frequency magnetoimpedanc…

Magnetoelectric composites are an important class of multiferroic materials that pave the way towards a new generation of multifunctional devices directly integrable in data storage technology and spintronics. This study focuses on…

The field-dependence elastic modulus of magnetostrictive films, also called {\Delta}E or {\Delta}G effect, is crucial for ultrasensitive magnetic field sensors based on surface acoustic waves (SAWs). In spite of a lot of successful…

Measurements of ferromagnetic resonance (FMR) are pivotal to modern magnetism and spintronics. Recently, we reported on the Ferris FMR technique, which relies on large-amplitude modulation of the externally applied magnetic field. It was…

In the fifth-generation and beyond era, reconfigurable intelligent surface (RIS) and dynamic metasurface antennas (DMAs) are emerging metamaterials keeping up with the demand for high-quality wireless communication services, which promote…

Microwave (MW) transmission, absorption, and reflection loss spectra of the ferrimagnetic U-type hexaferrite Sr$_4$CoZnFe$_{36}$O$_{60}$ ceramics were studied from 100 MHz to 35 GHz at temperatures between 10 and 390 K. 9 MW magnetic…

Magnetic Particle Imaging (MPI) is a promising imaging modality that tracks magnetic nanoparticles (MNPs) to generate real time, high-resolution images. However, achieving an optimal balance between strong signal strength and sharp image…

The discovery of ferromagnetism in Mn doped GaAs [1] has ignited interest in the development of semiconductor technologies based on electron spin and has led to several proof-of-concept spintronic devices [2-4]. A major hurdle for realistic…

Static and dynamic magnetic properties of a ferrimagnetic [Fe(35A)/Gd(50A)]x12 superlattice were investigated in a wide 4-300 K temperature range using magneto-optical Kerr effect (MOKE) and ferromagnetic resonance (FMR) techniques. The…

The magnetic proximity effect (MPE), ferromagnetic coupling at the interface of magnetically dissimilar layers, attracts much attention as a promising pathway for introducing ferromagnetism into a high-mobility non-magnetic conducting…

Surface acoustic waves (SAW) in the GHz frequency range are exploited for the all-elastic excitation and detection of ferromagnetic resonance (FMR) in a ferromagnetic/ferroelectric (nickel/lithium niobate) hybrid device. We measure the SAW…

We succeeded in the fabrication of high-Jc MgB2/Fe wires applying the internal Mg diffusion (IMD) process with pure Mg core and SiC addition. A pure Mg rod with 2 mm diameter was placed at the center of a Fe tube, and the space between Mg…

The interfacial Dzyaloshinskii-Moriya interaction (iDMI) is attracting great interests for spintronics. An iDMI constant larger than 3 mJ/m^2 is expected to minimize the size of skyrmions and to optimize the DW dynamics. In this study, we…

Reactive single-step hot-pressing at 1473 K and 35 MPa for 4 h produces dense, bulk, near single-phase, low-cost and low-criticality Fe$_2$Al$_{1.15}$B$_2$ and Fe$_2$Al$_{1.1}$B$_2$Ge$_{0.05}$Ga$_{0.05}$ MAB samples, showing a second-order…

We present a scanning transmission x-ray microscopy setup combined with a novel microwave synchronization scheme in order to study high frequency magnetization dynamics at synchrotron light sources. The sensitivity necessary to detect small…

A single-phase polycrystalline La0.5Ba0.5CoO3-d sample was synthesized by microwave irradiation within 20 minutes of processing time and its structural, magnetic, electrical, and magnetostrictive properties were investigated. While the…

Reconfigurable intelligent surface (RIS) has been anticipated to be a novel cost-effective technology to improve the performance of future wireless systems. In this paper, we investigate a practical RIS-aided multiple-input-multiple-output…

Cold high pressure densification (CHPD) is presented as a new way to substantially enhance the critical current density of in situ MgB2 wires at 4.2 and 20 K at fields between 5 and 14 T. The results on two binary MgB2 wires and an alloyed…

Kinetic-inductance traveling-wave parametric amplifiers (KI-TWPAs) offer broadband near-quantum-limited amplification with high saturation power. Due to the high critical magnetic fields of high-kinetic-inductance materials, KI-TWPAs should…

Direct measurements of the magnetocaloric effect (MCE) in different materials (Gd, Fe48Rh52, Ni43Mn37.9In12.1Co7 and Ni2.07Co0.09Mn0.84Ga) in alternating magnetic fields with frequencies f < 22 Hz and an amplitude deltaH = 6.2 kOe are…

The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction…