相关论文: UMG silicon for solar PV: from defects detection t…
Recently developed classes of monocrystalline silicon solar microcells (u-cell) can be assembled into modules with characteristics (i.e., mechanically flexible forms, compact concentrator designs, and high-voltage outputs) that would be…
In the previous decade, there has been a significant advancement in the performance of perovskite solar cells (PSCs), characterized by a notable increase in efficiency from 3.8% to 25%. Nonetheless, PSCs face many problems when we…
Solar photons possessing energy less than the band-gap of a single-junction solar cell can be utilized via the up-conversion (UC) of two or more photons, resulting in the emission of a single above-bandgap photon. Due to the non-linear…
Thin crystalline silicon solar photovoltaics holds great potential for reducing the module price by material saving and increasing the efficiency by reduced bulk recombination loss. However, the module efficiency decreases rather…
This study presents a comprehensive simulation-based optimization of gallium nitride (GaN)-based metal-semiconductor-metal (MSM) photodetectors designed for ultraviolet (UV) applications. The proposed device architecture incorporates a…
The design and fabrication of a metal-dielectric-metal absorber that achieves strong absorption from the ultraviolet (UV) to the near-infrared (near-IR) spectrum are presented. The proposed nanostructure consists of a periodic titanium (Ti)…
Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective…
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge…
Low cost, highly efficient, and stable solar cells demand low temperature processing, less stringent criteria on materials, and possibility of dynamic recovery from long term degradation: a combination of features unachievable from the…
Polymer based organic photovoltaic (OPV) technology offers a relatively inexpensive option for solar energy conversion provided its efficiency increases beyond the current level (6-7%) along with significant improvements in operational…
Reverse biasing triple-junction GaInP/Ga(In)As/Ge solar cells may affect their performance by the formation of permanent shunts even if the reverse breakdown voltage is not reached. In previous works, it was observed that, amid the three…
The scanning mid-IR-laser microscopy was previously demonstrated as an effective tool for characterization of different semiconductor crystals. Now the technique has been successfully applied for the investigation of CZ SixGe1-x -- a…
Lead-halide perovskites have demonstrated astonishing increases in power conversion efficiency in photovoltaics over the last decade. The most efficient perovskite devices now outperform industry-standard multi-crystalline silicon solar…
Historically, the design of hybrid solar photovoltaic thermal (PVT) systems has focused on cooling crystalline silicon (c-Si)-based photovoltaic (PV) devices to avoid temperature-related losses. This approach neglects the associated…
This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide…
The escalating demand for ultraviolet (UV) sensing in space exploration, environmental monitoring, and agricultural productivity necessitates detectors that are both environmentally and mechanically resilient. Diamond, featuring its high…
Hydrogenated amorphous silicon (a-Si:H) has had a long standing role as a passivating dielectric for c-Si, often utilized in the early development of ICs and more recently for Si solar cells. Although it has been studied for more than 60…
The realization of ultra-compact passive silicon photonic devices is becoming more and more important for the future large-scale photonic integration as desired for many systems. Although some compact silicon photonic devices have been…
In spite of having higher carrier mobilities and absorption coefficients of germanium (Ge) than those of silicon (Si), there has been less focus on Ge-based solar cells due to the low bandgap and high-cost of Ge wafer as well as requirement…
The power conversion efficiency of an ultrathin CIGS solar cell was maximized using a coupled optoelectronic model to determine the optimal bandgap grading of the nonhomogeneous CIGS layer in the thickness direction. The bandgap of the CIGS…