相关论文: Precipitate strengthening of pyramidal slip in Mg-…
One usual way to strengthen a metal is to add alloying elements and to control the size and the density of the precipitates obtained. However, precipitation in multicomponent alloys can take complex pathways depending on the relative…
Isothermal ageing of plastically deformed Mg-Zn-Y alloys resulted in precipitation along {10-12} twin boundaries. The bulky precipitates formed had structures similar to those recently reported for the rod-like \beta' precipitates, but…
Compared to cubic metals, whose primary slip mode includes twelve equivalent systems, the lower crystalline symmetry of hexagonal close-packed metals results in a reduced number of equivalent primary slips and anisotropy in plasticity,…
Atomistic simulations were carried out to analyze the interaction between $< a>$ basal dislocations and precipitates in Mg-Al alloys and the associated strengthening mechanisms.
Magnesium is the lightest structural alloy, yet its practical use is limited by its low ductility. Recent studies suggest ductility enhancement in dilute Mg alloys may stem from favorable solute modification of <c+a> pyramidal I/II screw…
A detailed study of the precipitation of the \gamma' (AlAg2) phase in undeformed aluminium-silver alloys has been conducted. Several previously unreported features were observed, including the formation of discrete three-dimensional…
Precipitation in Mg-Zn alloys was analyzed by means of first principles calculations. Formation energies of symmetrically distinct hcp Mg1-xZnx (0 < x < 1) configurations were determined and potential candidates for Guinier-Preston zones…
Magnesium (Mg) has the lowest density of all structural metals and has excellent potential for wide use in structural applications. While pure Mg has inferior mechanical properties; the addition of further elements at various concentrations…
Alloying magnesium (Mg) with rare earth elements such as yttrium (Y) has been reported to activate the pyramidal <c + a> slip systems and improve the plasticity of Mg at room temperature. However, the origins of such dislocations and their…
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier…
Intermetallic precipitates formed in heat-treated and aged Mg-Zn and Mg-Zn-Y alloys have been investigated via electron microscopy. Coarse spheroidal precipitates formed on deformation twin boundaries contained domains belonging to either…
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $\theta''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume…
Precipitation on deformation defects is essential for enhancing mechanical properties of age-hardenable alloys. {10-12} twinning is common in deformed alloys with hexagonal-close-packed structure. In this work, we revealed how {10-12} twin…
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge…
The precipitation microstructure of the \gamma' (AlAg2) intermetallic phase has been examined in aluminium-silver-copper alloys. The microstructure developed in an Al-0.90at.%Ag-0.90at.%Cu alloy was significantly different from that…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
Plasticity in hexagonal close packed (HCP) metals and alloys such as Titanium (Ti) and Zirconium (Zr) is carried out by the motion of $\langle a \rangle$ dislocations. Above room temperature, in situ transmission electron microscopy…
Precipitate-matrix interactions govern the mechanical behavior of precipitate strengthened Al-based alloys. These alloys find a wide range of applications ranging from aerospace to automobile and naval industries due to their low cost and…
We apply a combinatorial approach to study the influence of Mg concentration on the precipitation kinetics in an Al-Cu-Li alloy using a diffusion couple made by linear friction welding. The precipitation kinetics is monitored in the…
Cobalt-based alloys with {\gamma}/{\gamma}' microstructures have the potential to become the next generation of superalloys, but alloy compositions and processing steps must be optimized to improve coarsening, creep, and rafting behavior.…