相关论文: Effect of Different Device Parameters on Tin Based…

A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study…

Lead-free all-inorganic halide perovskite solar cells (PSCs) have emerged as a promising alternative to toxic lead-based solar cells and organic solar cells, which have limited stability. This work explores such a PSC with sodium tin…

CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density…

The transition to sustainable energy has accelerated research into perovskite solar cells (PSCs) as promising candidates for next-generation photovoltaics. Despite their remarkable efficiencies, the commercialization of PSCs is hindered by…

The charge accumulation properties of p-i-n perovskite solar cells were investigated using three representative organic and inorganic hole transporting layer (HTLs): a) Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS, Al…

After the efficiency of organic photovoltaic (OPV) cells achieved more than 10%, the control of stability and degradation mechanisms of solar cells became a prominent task. The improvement of device efficiency due to incorporation of a…

The significant surge in energy use and escalating environmental concerns have sparked worldwide interest towards the study and implementation of solar cell technology. Perovskite solar cells (PSCs) have garnered remarkable attention as an…

Perovskite solar cells (PSCs) without a hole transport layer (HTL) offer a cost-effective and stable alternative to conventional architectures, utilizing only an absorber layer and an electron transport layer (ETL). This study presents a…

With the rapid advancement of photovoltaic science, there has been an increasing focus on the development of environment-friendly and structurally advanced perovskite solar cells (PSCs). In this context, this study investigates an…

In the previous decade, there has been a significant advancement in the performance of perovskite solar cells (PSCs), characterized by a notable increase in efficiency from 3.8% to 25%. Nonetheless, PSCs face many problems when we…

Perovskite Solar Cells (PSCs) have garnered global research interest owing to their superior photovoltaic (PV) performance. The future of photovoltaic technology lies in PSCs since they can produce power with performance on par with the…

We carried out simulative investigations on a non-toxic, lead-free perovskite solar cell (PSC), where Cs2AgBiBr6, P3HT, ZnO nanorod, and C were utilized as the absorber layer, hole transport layer, electron transport layer, and back…

Using a representative translational dimer model, high throughput calculations are implemented for fast screening of a total of 74 diacenaphtho-extended heterocycle (DAH) derivatives as hole transport layer (HTL) materials in perovskite…

Despite the promising optoelectronic properties of methylammonium lead iodide (MAPbI3)-based perovskite solar cells (PSCs), their commercial viability is hindered by interfacial energy misalignment, suboptimal light absorption, and thermal…

One of the critical challenges in enhancing the performance of perovskite solar cells is reducing the density of trap states in the light-absorbing perovskite layer. These trap states lead to increased charge carrier recombination, thus…

Tin perovskites are the most promising environmentally friendly alternative to lead perovskites. Among tin perovskites, FASnI3 (CH4N2SnI3) shows optimum band gap, and easy processability. However, the performance of FASnI3 based solar cells…

Halide perovskite solar cells (PSCs) offer high efficiency and low costs, making them key for future photovoltaics. Optimizing charge transport layers is crucial, with porous TiO$_2$ widely used as electron transport layers (ETL) due to its…

In this work, layered perovskite SBN was investigated in a new doped form for hole as well as electron transport layer (HTL/ETL) in perovskite solar cells. This work was targeted to conclude the effect of tin doping in lanthanum-bismuth…

In perovskite solar cells, photovoltaic action is created by charge transport layers (CTLs) either side of the light-absorbing metal halide perovskite semiconductor. Hence, the rates for desirable charge extraction and unwanted interfacial…

Perovskite solar cells are one of the most attracting cells because of remarkably improved power conversion efficiency (PCE) recently. Toward their practical application, it is important not only to increase the PCE but also to elucidate…