相关论文: AgCl-induced hot salt stress corrosion cracking in…
Hot salt stress corrosion cracking in Ti 6246 alloy has been investigated to elucidate the chemical mechanisms that occur. Cracking was found to initiate beneath salt particles in the presence of oxidation. The observed transgranular…
The effect of crystallography on transgranular chloride-induced stress corrosion cracking (TGCISCC) of arc welded 304L austenitic stainless steel is studied on >300 grains along crack paths. Schmid and Taylor factor mismatches across grain…
A hot salt corrosion (HSC) test was performed on the fine-grained titanium alpha-alloy Ti-2.5Al-2.6Zr (Russian industrial alloy PT-7M). The ultrafine-grained (UFG) microstructure in the titanium alpha-alloy was formed via cold Rotary…
Ni-based structural alloys in molten salt environments often experience simultaneous mechanical loading and corrosive attack, yet the mechanisms governing stress-corrosion interactions remain unclear. Prior studies largely emphasize tensile…
Titanium alloys can suffer from halide-associated stress corrosion cracking at elevated temperatures e.g., in jet engines, where chlorides and Ti-oxide promote the cracking of water vapour in the gas stream, depositing embrittling species…
Dislocation interactions at the crack nucleation site were investigated in near-alpha titanium alloy Ti-6242Si subjected to low cycle fatigue. Cyclic plastic strain in the alloy resulted in dislocation pile-ups in the primary alpha grains,…
High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking…
Hydrogen embrittlement (HE) affects all major high-strength structural materials and as such is a major impediment to lightweighting e.g. vehicles and help reduce carbon-emissions and reach net-zero. The high-strength 7xxx series aluminium…
The corrosion-fatigue strength in 3% aqueous NaCl solution and the resistance against hot salt corrosion (HSC) of the fine-grained near-a alloy Ti-5Al-2V (Russian analog of Grade 9 titanium alloy with increased aluminum content) has been…
Recent experiments have shown that chemical ordering in NiCr alloys can significantly accelerate corrosion in molten salt environments. However, the underlying mechanisms remain poorly understood. Using reactive molecular dynamics and…
Crack growth in stress corrosion cracking (SCC) in 7xxx Al alloys is an intermittent process, which generates successive crack arrest markings (CAMs) visible on the fracture surface. It is conjectured that H is generated at the crack tip…
The galling mechanism of Tristelle 5183, an Fe-based hardfacing alloy, was investigated at elevated temperature. The test was performed using a bespoke galling rig. Adhesive transfer and galling were found to occur, as a result of shear at…
We characterize the grain boundary (GB) susceptibility to hydrogen-assisted intergranular cracking in pure nickel as a function of coincident site lattice value ($\Sigma$-n), over a wide range of hydrogen concentrations (4 to 14 wppm).…
Plasticity in hexagonal close packed (HCP) metals and alloys such as Titanium (Ti) and Zirconium (Zr) is carried out by the motion of $\langle a \rangle$ dislocations. Above room temperature, in situ transmission electron microscopy…
Advanced g-TiAl based intermetallics Mo-bearing have been developed to obtain the fine-grained microstructure required for superplastic deformation to be used during further processing. In the present work we have studied an alloy of…
The research aims to analyze the impact that severe plastic deformation arising during Rotary Swaging has on mechanical properties and corrosion resistance of a near-a-titanium alloy Ti-2.5Al-2.6Zr (Russian industrial name PT7M). The nature…
The corrosion behavior of NiCr alloys in molten FLiNaK salt is governed by complex Cr-F chemical interactions, necessitating a fundamental understanding for enhancing alloy performance in harsh environments. However, significant gaps remain…
The uniaxial tensile test response of a H decorated $\Sigma$ 5 [100] twist grain boundary (GB) in face-centered-cubic Al has been examined with first principles. The impurity shows a strong tendency to relocate during loading. To capture…
The microstructure, mechanical properties, and corrosion behavior of friction stir welded (FSW) AA6061 aluminum alloys were investigated. Dynamic recrystallized structures were observed and grain sizes of nugget zone (NZ),…
A novel model based on the Peierls framework of dislocations is developed. The new theory can deal with a dislocation spreading at more than one slip planes. As an example, we study dislocation cross-slip and constriction process of two fcc…