相关论文: Shock-induced heating and transition to turbulence…
The dynamics of a shock wave impinging on a transitional high-enthalpy boundary layer out of thermochemical equilibrium is investigated for the first time by means of a direct numerical simulation. The freestream Mach number is equal to 9…
Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while…
Results of numerical simulations obtained by a staggered finite difference scheme together with an efficient immersed boundary method are presented to understand the effects of the shape of three-dimensional obstacles on the transition of a…
Direct Numerical Simulation (DNS) of a Mach 6 boundary layer over a flat plate is performed to assess the effect of spanwise non-uniform surface temperature on breakdown to turbulence under deterministic forcing. The streamwise location of…
The influence of high-enthalpy effects on hypersonic turbulent boundary layers is investigated by means of direct numerical simulations (DNS). A quasi-adiabatic flat-plate air flow at free-stream Mach number equal to 10 is simulated up to…
Direct numerical simulations are carried out to investigate the effect of the wall temperature on the behavior of oblique shock-wave/turbulent boundary layer interactions at freestream Mach number $2.28$ and shock angle of the wedge…
This experimental and numerical study examines transition to turbulence for a Cone-Cylinder-Flare geometry at Mach 7 and across a broad Reynolds number range. The focus is set on both attached boundary layers and separated shock-boundary…
Boundary layers of adiabatic and isothermal curved walls are investigated for a supersonic turbine cascade, including the effects of shock-boundary layer interactions (SBLIs). Wall-resolved large eddy simulations (LES) are performed for a…
The objective of the present study is to provide a numerical database of thermal boundary layers and to contribute to the understanding of the dynamics of passive scalars at different Prandtl numbers. In this regard, a direct numerical…
Direct numerical simulation of the Navier-Stokes equations is carried out to investigate the interaction of a conical shock wave with a turbulent boundary layer developing over a flat plate at free-stream Mach number $M_\infty = 2.05$ and…
The decompositions of the skin-friction and heat transfer coefficients based on the two-fold repeated integration in hypersonic transitional and turbulent boundary layers are analyzed to explain the generations of the wall skin friction and…
Supersonic turbulent channels subjected to sudden spanwise acceleration at initial friction Reynolds numbers of approximately 500 and different Mach numbers are studied through direct numerical simulations. The response to the spanwise…
Hypersonic flow conditions pose exceptional challenges for Reynolds-Averaged Navier-Stokes (RANS) turbulence modeling. Critical phenomena include compressibility effects, shock/turbulent boundary layer interactions, turbulence-chemistry…
Wall-cooling effect in hypersonic boundary layers can significantly alter the near-wall turbulence behavior, which is not accurately modeled by traditional RANS turbulence models. To address this shortcoming, this paper presents a…
A direct numerical simulation of an oblique shock wave impinging on a turbulent boundary layer at Mach number 2.28 is carried out at moderate Reynolds number, simulating flow conditions similar to those of the experiment by Dupont et al.…
The turbulent boundary layer over a flat plate is computed by direct numerical simulation (DNS) of the incompressible Navier-Stokes equations as a test bed for a synthetic turbulence generator (STG) inflow boundary condition. The inlet…
The objective of this work is to investigate the unexplored laminar-to-turbulent transition of a heated flat-plate boundary layer with a fluid at supercritical pressure. Two temperature ranges are considered: a subcritical case, where the…
The turbulent boundary layer over a Gaussian shaped bump is computed by direct numerical simulation (DNS) of the incompressible Navier-Stokes equations. The two-dimensional bump causes a series of strong pressure gradients alternating in…
We perform direct numerical simulations of shock-wave/boundary-layer interactions (SBLI) at Mach number M = 1.7 to investigate the influence of the state of the incoming boundary layer on the interaction properties. We reproduce and extend…
Surface roughness significantly impacts transition to turbulence, especially over high-speed, blunt geometries where surface ablation is necessary to mitigate heat loads during atmospheric entry. Inspired by sand-grain roughness experiments…