相关论文: Finite-Alphabet Wiener Filter Precoding for mmWave…

In this paper, we propose network massive multiple- input multiple-output (MIMO) systems, where three radio units (RUs) connected via one digital unit (DU) support multiple user equipments (UEs) at a cell-boundary through the same radio…

In this paper, we investigate the design of linear precoders for the multiple-input multiple-output (MIMO) multiple access channel (MAC). We assume that statistical channel state information (CSI) is available at the transmitters and…

Large propagation path loss and limited scattering of millimeter wave (mmwave) channels create new challenges for physical layer signal processing. Hence, in this article, we propose a photonic hybrid precoding model for mmwave…

The energy consumption of wireless networks is a growing concern. In massive MIMO systems, which are being increasingly deployed as part of the 5G roll-out, the power amplifiers in the base stations have a large impact in terms of power…

This paper considers a multi-user multiple-input multiple-output (MU-MIMO) system where the precoding matrix is selected in a baseband unit (BBU) and then sent over a digital fronthaul to the transmitting antenna array. The fronthaul has a…

With the growing interest in the deployment of massive multiple-input-multiple-output (MIMO) systems and millimeter wave technology for fifth generation (5G) wireless systems, the computation power to the total power consumption ratio is…

In the conventional multiuser MIMO systems, user selection and scheduling has previously been used as an effective way to increase the sum rate performance of the system. However, the recent concepts of the massive MIMO systems (at…

By processing in the frequency domain (FD), massive MIMO systems can approach the theoretical per-user capacity using a single carrier modulation (SCM) waveform with a cyclic prefix. Minimum mean squared error (MMSE) detection and zero…

Base station (BS) architectures for massive multi-user (MU) multiple-input multiple-output (MIMO) wireless systems are equipped with hundreds of antennas to serve tens of users on the same time-frequency channel. The immense number of BS…

Large-scale multi-user multiple-input multiple-output (MIMO) techniques have the potential to bring tremendous improvements for future communication systems. Counter-intuitively, the practical issues of having uncertain channel knowledge,…

This work proposes a mixed learning-based and optimization-based approach to the weighted-sum-rates beamforming problem in a multiple-input multiple-output (MIMO) wireless network. The conventional methods, i.e., the fractional programming…

This paper studies energy-efficient hybrid beamforming architectures and its algorithm design in millimeter-wave communication systems, aiming to address the challenges faced by existing hybrid beamforming due to low hardware flexibility…

We consider a cell-free massive multiple-input multiple-output (mMIMO) network, where unmanned aerial vehicles (UAVs) equipped with multiple antennas serve as distributed UAV-access points (UAV-APs). These UAV-APs provide seamless coverage…

Cell-free massive multiple-input multiple-output (CF mMIMO) systems serve the user equipments (UEs) by geographically distributed access points (APs) by means of joint transmission and reception. To limit the power consumption due to…

Network densification, massive multiple-input multiple-output (MIMO) and millimeter-wave (mmWave) bands have recently emerged as some of the physical layer enablers for the future generations of wireless communication networks (5G and…

In multi-user multiple-input multiple-output (MU-MIMO) systems, the non-linear behavior of the power amplifiers (PAs) may cause degradation of the linear precoding schemes dealing with interference between user equipments (UEs), e.g., the…

The deployment of millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems cannot rely solely on digital precoding due to hardware constraints. Instead, hybrid precoding, which combines digital and radio frequency (RF)…

Massive multiple-input multiple-output (MIMO) is a key technology for 5G wireless communications with a promise of significant capacity increase. The use of low-resolution data converters is crucial for massive MIMO to make the overall…

This paper jointly designs linear precoding (LP) and codebook-based beamforming implemented in a satellite with massive multiple-input multiple-output (mMIMO) antenna technology. The codebook of beamforming weights is built using the…

Massive MIMO systems are typically designed assuming linear power amplifiers (PAs). However, PAs are most energy efficient close to saturation, where non-linear distortion arises. For conventional precoders, this distortion can coherently…