相关论文: Solid-state Li-ion batteries operating at room tem…

We present a structural and magnetic study on two batches of polycrystalline LiNi$_{0.8}$Mn$_{0.1}$Co$_{0.1}$O$_2$ (commonly known as Li NMC 811), a Ni-rich Li ion battery cathode material, using elemental analysis, X-ray and neutron…

Lithium metal batteries (LMB) are vital devices for high-energy-density energy storage, but Li metal anode is highly reactive with electrolyte and forms uncontrolled dendrite that can cause undesirable parasitic reactions thus poor cycling…

Solid-state batteries (SSBs) are promising next-generation batteries due to their high energy density and enhanced thermal stability and safety. However, their sluggish kinetics and transport at room temperature results in high internal…

Solid-state lithium batteries (SLBs) offers a promising avenue for the development of next-generation lithium-ion batteries with ultrahigh energy density and safety performance. This review provides a quick overview of the state-of-the-art…

Low temperature rechargeable batteries are important to life in cold climates, polar/deep-sea expeditions and space explorations. Here, we report ~ 3.5 - 4 V rechargeable lithium/chlorine (Li/Cl2) batteries operating down to -80 {\deg}C,…

Highly conductive solid electrolytes are one key component for the development of safe and high-power all-solid-state batteries. Enormous progress has been achieved in the field of lithium solid electrolytes. Meanwhile, their ion…

We have investigated the lithium capacity of the 2H phase of niobium sulphide (NbS2) using density functional theory calculations and experiments. Theoretically, this material is found to allow the intercalation of a double layer of Li in…

A 6-cell solid oxide electrolysis stack was tested under H2O + CO2 co-electrolysis conditions. The cells used in the stack consisted of a nickel-yttria stabilized zirconia (Ni-YSZ) fuel electrode, YSZ electrolyte and lanthanum strontium…

The entirely soft and transformable room-temperature liquid metal battery based on 3D hybrid printing was proposed and experimentally demonstrated. Liquid metal gallium and conductive gel were employed as the negative and positive electrode…

Ether-based electrolytes exhibit excellent compatibility with Li metal anodes, but their instability at high voltages limits their use in high-voltage Li metal batteries. To address this issue, we introduce an alternative perfluorobutane…

In recent years there has been a major interest in developing all solid state batteries, for the sake of safety (issues due to toxic and flammable organic liquid electrolytes are well known) as well as of high energy density…

We report the electrochemical sodium-ion kiinetics and distribution of relaxation time (DRT) analysis of a newly designed mixed polyanionic NaFe$_{1.6}$V$_{0.4}$(PO$_{4}$)(SO$_{4}$)$_{2}$@CNT composite as a cathode. The specific capacity of…

Solid-state electrolytes have the potential to stabilize lithium metal anodes, which hold the promise to increase the energy density of lithium-ion batteries. However, lithium metal dendrites that occur locally at the solid-solid interface…

Li$_{7-4x}$Ge$_x$La$_3$Zr$_2$O$_{12}$ has been synthesized using the conventional solid-state reaction method by substituting Germanium (Ge) at the Li site, which increases the Li-ion vacancies and leads to an increase in conductivity with…

Solid state battery technology has recently garnered considerable interest from companies including Toyota, BMW, Dyson, and others. The primary driver behind the commercialization of solid state batteries (SSBs) is to enable the use of…

Several active areas of research in novel energy storage technologies, including three-dimensional solid state batteries and passivation coatings for reactive battery electrode components, require conformal solid state electrolytes. We…

Li-CO$_2$ batteries are promising energy storage systems due to their high theoretical energy density and CO$_2$ fixation capability, relying on reversible Li$_2$CO$_3$/C formation during discharge/charge cycles. We present a multiscale…

It is of great importance to develop inorganic solid electrolytes with high ionic conductivity, thus enabling solid state Li-ion batteries to address the notorious safety issue about the current technology due to use of highly flammable…

We report a neutral salt water based battery which uses p-type and n-type solution processed polymer films as the cathode and the anode of the cell. The specific capacity of the electrodes (approximately 30 mAh cm-3) is achieved via…

As a new type of self-healing material, room-temperature liquid metal (LM) composed of Ga, In and Sn is a promising anode in lithium-ion batteries (LIBs). It is difficult to directly prepare an electrode slurry with pure LM. Here, the LM…