相关论文: First principles analysis of precipitation in Mg-Z…
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about…
Isothermal ageing of plastically deformed Mg-Zn-Y alloys resulted in precipitation along {10-12} twin boundaries. The bulky precipitates formed had structures similar to those recently reported for the rod-like \beta' precipitates, but…
Intermetallic precipitates formed in heat-treated and aged Mg-Zn and Mg-Zn-Y alloys have been investigated via electron microscopy. Coarse spheroidal precipitates formed on deformation twin boundaries contained domains belonging to either…
Precipitation during high temperature aging of Al-Cu alloys is analyzed by means of the integration of classical nucleation theory and phase-field simulations into a multiscale modelling approach based on well-established thermodynamics…
The interaction between Mg edge basal dislocations and rod-shaped $\beta_1'$-MgZn$_2$ precipitates was studied by atomistic simulations using a new interatomic potential. The atomistic model was carefully built taking into account the…
We report on a quantitative investigation into the effect of size and distribution of rod-shaped \beta' precipitates on strength and ductility of a Mg-Zn alloy. Despite precipitation strengthening being crucial for the practical application…
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys. Early stages of precipitation are particularly important from the fundamental…
Microstructural analysis of a Mg-Zn alloy deformed at room temperature by high-pressure torsion (HPT) indicates that fine-scale precipitation occurs even without post-deformation heat treatment. Small-angle X-ray scattering detects…
Precipitation hardening, which relies on a high density of intermetallic precipitates, is a commonly utilized technique for strengthening structural alloys. Structural alloys are commonly strengthened through a high density of small size…
A class of proposed coherent precipitate structures (Guinier-Preston zones) in the Al-Mg-Si alloy are investigated using first-principles density functional theory methods. The cluster expansion method is used to extract effective…
The formation of precipitated zirconium (Zr) hydrides is closely related to the hydrogen embrittlement problem for the cladding materials of pressured water reactors (PWR). In this work, we systematically investigated the crystal structures…
The mechanisms of dislocation/precipitate interaction as well as the critical resolved shear stress were determined as a function of temperature in a Mg-4 wt. % Zn alloy by means of micropillar compression tests. It was found that the…
A multiscale approach based on the phase-field model is developed to simulate homogeneous and heterogeneous formation of {\theta}' precipitates during high temperature ageing in Al-Cu alloys. The model parameters that determine the…
The effect of pre-ageing deformation on the size and distribution of beta-prime precipitates and subsequently on the resulting strength and ductility have been measured in a Mg-3.0at.%Zn-0.5at.%Y alloy. The alloy was extruded and then…
The spatial distribution and morphology of precipitates formed during aging are key factors that determine the precipitation hardening response of various magnesium-rare earth alloys. In recent years, the use of high-performance computing…
The bonding and stability of MgSi and AlMgSi compounds relevant to AlMgSi alloys is investigated with the use of (L)APW+(lo) DFT calculations. We show that the $\beta$ and $\beta''$ phases found in the precipitation sequence are…
In this work electron backscattered diffraction (EBSD)-assisted slip trace analysis and transmission electron microscopy have been utilized to investigate the interaction of basal dislocations with precipitates in the Mg alloys…
MgB2 samples prepared by solid-state reaction were investigated using high-resolution transmission electron microscopy (HREM), X-ray energy-dispersive spectroscopy (EDX), electron energy-loss spectroscopy (EELS), and energy-filtered…
The high strength of structural aluminium alloys depends strongly on the controlled precipitation of specific intermetallic phases, whose identity and crystal structure can be difficult to predict. Here, we investigate the Al-Pt system,…
The origin of the phase stability of 18$R$ Mg-Zn-Y alloys with a long-period stacking order (LPSO) is studied using first-principles calculations. We calculate the heat of formation as a function of the number of Zn vacancies to discuss the…