相关论文: An Experimental mmWave Channel Model for UAV-to-UA…

Uncrewed Aerial Vehicle (UAV) networks require accurate Air-to-Air (A2A) channel models, but most existing work focuses on Air-to-Ground links and leaves the sub-6 GHz A2A channel poorly characterized. We present preliminary 3.4 GHz A2A…

The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular wireless systems. However, links in mmWave networks are highly susceptible to blocking and may suffer…

Millimeter-wave (mmWave) communication enables high data rates for cellular-connected Unmanned Aerial Vehicles (UAVs). However, a robust beam management remains challenging due to significant path loss and the dynamic mobility of UAVs,…

This paper presents an experimental study of the air-to-ground (AG) propagation channel through ultrawideband(UWB) measurements in an open area using unmanned-aerial-vehicles (UAVs). Measurements were performed using UWB radios operating at…

Measurements of the propagation channel form the basis of all realistic system performance evaluations, as foundation of statistical channel models or to verify ray tracing. This is also true for the analysis of cell-free massive…

Millimeter wave (mmWave) communication, utilizing beamforming techniques to address the inherent path loss limitation, is considered as one of the key technologies to support ever increasing high throughput and low latency demands of…

Millimeter wave (mmWave) communication links for 5G cellular technology require high beamforming gain to overcome channel impairments and achieve high throughput. While much work has focused on estimating mmWave channels and designing…

Millimeter Wave (mmWave) massive Multiple Input Multiple Output (MIMO) systems realizing directive beamforming require reliable estimation of the wireless propagation channel. However, mmWave channels are characterized by high variability…

In this paper, a recently conducted measurement campaign for unmanned-aerial-vehicle (UAV) channels is introduced. The downlink signals of an in-service long-time-evolution (LTE) network which is deployed in a suburban scenario were…

5G enabled maritime unmanned aerial vehicle (UAV) communication is one of the important applications of 5G wireless network which requires minimum latency and higher reliability to support mission-critical applications. Therefore, lossless…

Communication at mmWave frequencies is one of the major innovations of the fifth generation of cellular networks, because of the potential multi-gigabit data rate given by the large amounts of available bandwidth. The mmWave channel,…

The growing use of Unmanned Aerial Vehicles (UAVs) for various applications requires ubiquitous and reliable connectivity for safe control and data exchange between these devices and ground terminals. Depending on the application,…

Millimeter-wave (mmWave) communication has been widely accepted as an enabler of 6G and other next-generation wireless networks, though high path loss strains link budgets, and difficult channel conditions have limited the deployment of…

In this article, we first present our vision on the application scenarios, performance metrics, and potential key technologies of the sixth generation (6G) wireless communication networks. Then, 6G wireless channel measurements,…

Communication at millimeter wave (mmWave) frequencies is one of the main novelties introduced in the 5th generation (5G) of cellular networks. The opportunities and challenges associated with such high frequencies have stimulated a number…

Millimeter wave (mm-wave) communications is considered a promising technology for 5G networks. Exploiting beamforming gains with large-scale antenna arrays to combat the increased path loss at mm-wave bands is one of its defining features.…

The high attenuation of millimeter-wave (mmWave) would significantly reduce the coverage areas, and hence it is critical to study the propagation characteristics of mmWave in multiple deployment scenarios. In this work, we investigated the…

In this paper we study the deployment of multiple unmanned aerial vehicles (UAVs) to form a temporal UAV network for the provisioning of emergent communications to affected people in a disaster zone, where each UAV is equipped with a…

This paper presents a communication and energy-aware multi-UAV Coverage Path Planning (mCPP) method for scenarios requiring continuous inter-UAV communication, such as cooperative search and rescue and surveillance missions. Unlike existing…

Connected and autonomous vehicles will play a pivotal role in future Intelligent Transportation Systems (ITSs) and smart cities, in general. High-speed and low-latency wireless communication links will allow municipalities to warn vehicles…