相关论文: Localized pore evolution assisted densification du…
The present work reports the effect of Ta on densification and microstructure evolution during non-isothermal and spark plasma sintering of nanocrystalline W. Nanocrystalline W-5wt.%Ta alloy powder was synthesized using mechanical alloying.…
Spark plasma sintering (SPS) of MgAl2O4 powder was investigated at temperatures between 1200 and 1300{\deg}C. A significant grain growth was observed during densification. The densification rate always exhibits at least one strong minimum,…
The development of dispersion of nanoparticles in the W-1%Y$_2$O$_3$ and W-1%La$_2$O$_3$ (wt%) alloys processed by hot isostatic pressing has been investigated using small angle neutron scattering. The mode values of these centers are found…
The evolution of the nanoporous structure of cylindrical sintered silver samples during high temperature aging, ranging from 200 {\textdegree}C to 350 {\textdegree}C for 350 min, is studied through in-situ Computed X-Ray Tomography.…
The mechanisms of fast low-temperature Spark Plasma Sintering (SPS) of W + 10% wt. Ni powders were investigated. The powder compositions were obtained in two methods: (i) by mixing W and Ni powders in a specified ratio (hereinafter referred…
Laser-induced forward transfer (LIFT) printing is a versatile technique to realize micro/nano-scale additive manufacturing of functional materials, including metals and semiconductors. However, the crystallization phenomena during LIFT…
Pulsed Laser Deposition allows to obtain W and W-Ta alloy coatings with different nanostructures, monitored by X-ray diffraction. The correlation between such structures and the elastic properties is investigated for amorphous-like,…
The crystallization of amorphous solids under ultrafast laser irradiation represents a paradigm of non-equilibrium phase transitions, where the interplay between electromagnetic energy localization and atomic-scale dynamics remains largely…
Context. The level of porosity of interstellar ices - largely comprised of amorphous solid water (ASW) - contains clues on the trapping capacity of other volatile species and determines the surface accessibility that is needed for solid…
Early results on the plasma deposition of dielectric thin films on acoustic wave (AW) activated substrates revealed a densification pattern arisen from the focusing of plasma ions and their impact on specific areas of the piezoelectric…
Thin film metallic glasses undergoing devitrification can form partially crystallized or fully crystallized materials with novel structural and magnetic properties. The development of desired and tunable properties of such systems drives…
The modeling of powder compaction process, such as spark plasma sintering (SPS), requires the determination of the visco-plastic deformation behavior of the particle material including the viscosity moduli. The establishment of these…
Dealloying is a common corrosion process during which an alloy is "parted" by the selective dissolution of the electrochemically more active elements. This process results in the formation of a nanoporous sponge composed almost entirely of…
Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model for Cu nanoparticles on three Al$_2$O$_3$ surfaces ($\gamma$-Al$_2$O$_3$(100),…
Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range…
Structural rearrangement of polystyrene colloidal crystals under dry sintering conditions has been revealed by in situ grazing incidence X-ray scattering. Measured diffraction patterns were analysed using distorted wave Born approximation…
Developing nanostructured bulk ceramics is a major challenge when conventional high-temperature sintering is employed for consolidation. In the current investigation, yttria-stabilized zirconia (YSZ) with a composition of ZrO2 - 3 mol% Y2O3…
Disk polarization at (sub)millimeter wavelengths is being revolutionized by ALMA observationally, but its origin remains uncertain. Dust scattering was recently recognized as a potential contributor to polarization, although its basic…
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by…
Laser-induced modification of transparent solids by intense femtosecond laser pulses allows fast integration of nanophotonic and nanofluidic devices with controlled optical properties. So far, the local and dynamic nature of the…