相关论文: Designing transformation-induced plasticity and tw…

Aiming at increasing the yield strength of transformation and twinning induced plasticity (TRIP and TWIP) titanium alloys, a dual-phase $\alpha$/$\beta$ alloy is designed and studied. The composition Ti 7Cr 1.5Sn (wt.%) is proposed, based…

A medium Mn steel of composition Fe-4.8Mn-2.8Al-1.5Si-0.51C (wt.\%) was processed to obtain two different microstructures representing two different approaches in the hot rolling mill, resulting in equiaxed vs. a mixed equiaxed and lamellar…

High-entropy alloys (HEAs), and even medium-entropy alloys (MEAs), are an intriguing class of materials in that structure and property relations can be controlled via alloying and chemical disorder over wide ranges in the composition space.…

Metastable alloys with transformation/twinning-induced plasticity (TRIP/TWIP) can overcome the strength-ductility trade-off in structural materials. Originated from the development of traditional alloys, the intrinsic stacking fault energy…

Transformations in bcc-$\beta$, hcp-$\alpha$, and the $\omega$ phases of Ti alloys are studied using Density Functional Theory for pure Ti and Ti alloyed with Al, Si, V, Cr, Fe, Cu, Nb, Mo, and Sn. The $\beta$-stabilization caused by…

Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…

The microstructural mechanisms governing energy storage during plastic deformation of twinning-induced plasticity (TWIP) steels remain insufficiently understood, particularly under conditions of strain localization. This study provides a…

A new $\beta$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and…

Metastable alloys, such as $\beta$-phase titanium (Ti) alloys with a body-centered cubic (BCC) lattice, can exhibit exceptional mechanical properties through the interplay of multiple deformation mechanisms -- diffusionless phase…

Carbon is a well known austenite stabiliser and can be used to alter the stacking fault energy and stability against martensitic transformation in medium Mn steels, producing a range of deformation mechanisms such as the Transformation…

The influence of the physical mechanisms activated during deformation and annealing on the microstructure and texture evolution as well as on the mechanical properties in the equiatomic CoCrFeMnNi high-entropy alloy (HEA) were investigated.…

There is growing interest in promoting deformation twinning for plasticity in advanced materials, as highly organized twin boundaries are beneficial to better strength-ductility combination in contrast to disordered grain boundaries.…

The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…

This work presents a three-dimensional constitutive model for shape memory alloys considering the TRansformation-Induced Plasticity (TRIP) as well as the Two-Way Shape Memory Effect (TWSME) through a large deformation framework. The…

The influence of pre-strain and temperature on the superior properties exhibited by an Nb nanowire embedded in a NiTi shape memory alloy (SMA) are investigated via molecular dynamics simulations. To this end, a new Nb-Ni-Ti ternary…

Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels,…

Coarse-grained, metallic materials undergo microstructure refinement during tribological loading. This in turn results in changing tribological properties, so understanding deformation under tribological load is mandatory when designing…

Shape memory alloys (SMAs) have been intensively investigated as actuators for the past several decades. Due to their high actuation energy density compared to other active materials, their current and potential applications in engineering…

First-principles alloy theory is used to establish the $\gamma$-surface of Fe-Cr-Ni alloys as function of chemical composition and temperature. The theoretical stacking fault energy (SFE) versus chemistry and temperature trends agree well…

Medium-entropy alloys (MEAs) such as CoCrFeNi and CoCrNi are promising structural materials owing to their outstanding mechanical and thermal properties, which arise from complex chemical disorder and atomic-scale interactions. Although…