相关论文: Interactions between basal dislocations and $\beta…
The mechanical properties of Mg-4wt.% Zn alloy single crystals along the [0001] orientation were measured through micropillar compression at 23C and 100C. Basal slip was dominant in the solution treated alloy, while pyramidal slip occurred…
The interaction between Mg edge basal dislocations and rod-shaped $\beta_1'$-MgZn$_2$ precipitates was studied by atomistic simulations using a new interatomic potential. The atomistic model was carefully built taking into account the…
In this work electron backscattered diffraction (EBSD)-assisted slip trace analysis and transmission electron microscopy have been utilized to investigate the interaction of basal dislocations with precipitates in the Mg alloys…
The mechanical properties of Mg-Al alloys are greatly influenced by the complex intermetallic phase Mg$_{17}$Al$_{12}$, which is the most dominant precipitate found in this alloy system. The interaction of basal edge and 30$^\text{o}$…
We report on a quantitative investigation into the effect of size and distribution of rod-shaped \beta' precipitates on strength and ductility of a Mg-Zn alloy. Despite precipitation strengthening being crucial for the practical application…
The interaction between edge basal dislocations and $\beta$-Mg$_{17}$Al$_{12}$ precipitates was studied using atomistic simulations. A strategy was developed to insert a lozenge-shaped Mg$_{17}$Al$_{12}$ precipitate with Burgers orientation…
The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $\theta'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out…
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $\theta''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume…
The effect of pre-ageing deformation on the size and distribution of beta-prime precipitates and subsequently on the resulting strength and ductility have been measured in a Mg-3.0at.%Zn-0.5at.%Y alloy. The alloy was extruded and then…
The influence of different types of precipitates (either Guinier-Preston zones, $\theta''$ or $\theta'$) on the critical resolved shear stress and strain hardening was determined by means of micropillar compression tests in an Al - 4 wt. \%…
The influence of solute atoms (Al and Zn) on the deformation mechanisms and the critical resolved shear stress for basal slip in Mg alloys at 298 K and 373 K was ascertained by micropillar compression tests in combination with…
Precipitation strengthening is one of the most effective methods to design alloys with the desired combination of strength and ductility. The main mechanism of strengthening is generally known to be the interaction between dislocations and…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier…
Precipitation hardening, which relies on a high density of intermetallic precipitates, is a commonly utilized technique for strengthening structural alloys. Structural alloys are commonly strengthened through a high density of small size…
The interaction between dislocations and precipitates plays an important role in the mechanical behavior of alloys. To provide more insight into the physics of this interaction, this research analyzes short-range interactions of an edge…
A high-throughput methodology is proposed, based on the combination of diffusion couples and advanced nanomechanical testing methods, to directly measure alloying effects on the critical resolved shear stress (CRSS) of individual…
Microstructural analysis of a Mg-Zn alloy deformed at room temperature by high-pressure torsion (HPT) indicates that fine-scale precipitation occurs even without post-deformation heat treatment. Small-angle X-ray scattering detects…
The two-dimensional dislocation dynamics approach has been recently used for analyzing plastic deformation in metals and alloys at elevated temperatures. The two-dimensional approach, however, only accounts for the dislocation climbing…
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about…