相关论文: Joint Estimation of Operational Topology and Outag…
This paper proposes an efficient algorithmic approach that overcomes the critical challenges in the real-time unbalanced distribution system state estimation, topology error processing, and outage identification simultaneously: (1) Limited…
The reliable operation of a power distribution system relies on a good prior knowledge of its topology and its system state. Although crucial, due to the lack of direct monitoring devices on the switch statuses, the topology information is…
Distribution grid is the medium and low voltage part of a large power system. Structurally, the majority of distribution networks operate radially, such that energized lines form a collection of trees, i.e. forest, with a substation being…
The topology of a power grid affects its dynamic operation and settlement in the electricity market. Real-time topology identification can enable faster control action following an emergency scenario like failure of a line. This article…
We present a method for joint phase identification and topology recovery in unbalanced three phase radial networks using only voltage measurements. By recovering phases and topology jointly, we utilize all three phase voltage measurements…
Distributed optimization methods have been extensively applied for the optimization of electric power distribution systems, especially for grid-edge coordination. Existing distributed optimization algorithms applied to power distribution…
Accurate topology information is critical for effective operation of power distribution networks. Line outages change the operational topology of a distribution network. Hence, outage detection is an important task. Power distribution…
Limited presence of nodal and line meters in distribution grids hinders their optimal operation and participation in real-time markets. In particular lack of real-time information on the grid topology and infrequently calibrated line…
Distribution grids refer to the part of the power grid that delivers electricity from substations to the loads. Structurally a distribution grid is operated in one of several radial/tree-like topologies that are derived from an original…
Distribution network topology detection and state estimation in real-time are critical for modern distribution systems management and control. However, number of sensors in distribution networks are limited and communication links between…
Understanding the feasible power flow region is of central importance to power system analysis. In this paper, we propose a geometric view of the power system loadability problem. By using rectangular coordinates for complex voltages, we…
We consider the worst-case load-shedding problem in electric power networks where a number of transmission lines are to be taken out of service. The objective is to identify a pre-specified number of line outage that leads to the maximum…
Accurate network topology information is critical for secure operation of smart power distribution systems. Line outages can change the operational topology of a distribution network. As a result, topology identification by detecting…
Distribution grids represent the final tier in electric networks consisting of medium and low voltage lines that connect the distribution substations to the end-users. Traditionally, distribution networks have been operated in a radial…
Optimal operation of distribution grid resources relies on accurate estimation of its state and topology. Practical estimation of such quantities is complicated by the limited presence of real-time meters. This paper discusses a theoretical…
As power systems become more complex and uncertain, low-voltage distribution networks face numerous challenges, including three-phase imbalances caused by asymmetrical loads and distributed energy resources. We propose a robust stochastic…
An accurate distribution network model is crucial for monitoring, state estimation and energy management. However, existing data-driven methods often struggle with scalability or impose a heavy computational burden on large distribution…
The non-linearity and non-convexity of power flow models and the phase coupling challenge the analysis and optimization of unbalanced distribution networks. To tackle the challenges, this paper proposes an online feedback-based linearized…
Power distribution networks, especially in North America, are often unbalanced but are designed to keep unbalance levels within the limits specified by IEEE, IEC, and NEMA standards. However, rapid integration of unbalanced devices, such as…
Distribution power systems (DPSs) are mostly unbalanced, and their loads may have notable static voltage characteristics (ZIP loads). Hence, despite abundant papers on linear single-phase power flow models, it is still necessary to study…