相关论文: Improving polyhydroxyalkanoates production in phot…
In the present study, different photoperiods and nutritional conditions were applied to a mixed wastewater-borne cyanobacterial culture in order to enhance the intracellular accumulation of polyhydroxybutyrates (PHBs) and carbohydrates. Two…
Most polymers are long-lasting and produced from monomers derived from fossil fuel sources. Bio-based and/or biodegradable plastics have been proposed as a sustainable alternative. Amongst those available, polyhydroxyalkanoate (PHA) shows…
Diffuse pollution in rural areas due to agricultural run-off is a widespread and difficult problem to address due to the vast areas affected. Drainage channels do receive these polluted waters, but its introduction in the conventional…
Metal halide perovskites (MHPs) based phosphor-converted light-emitting diodes (pc-LEDs) are limited by the low MHP stability under storage/operation conditions. A few works have recently stablished the in-situ synthesis of MHPs into…
In this paper, we report herein, the conversion of waste prescription and non-prescription pharmaceuticals into carbonaceous materials. The hydrothermal carbonization (HTC) of the pharmaceuticals was carried out at temperatures of 180, 230…
Extra cellular alkaline protease producing species is an isolate from soil which was characterized and identified as Streptomyces pulvereceus MTCC 8374. Studies on submerged fermentation revealed that maximum level of enzyme production was…
In order to develop a long-lifetime MCP-PMT under high rates of circumstance, we investigated the degradation of the quantum efficiency (QE) of PMT's with a multialkali photocathode. We found that not only positive ions, but also neutral…
The potential of industrial applications for microalgae has motivated their recent fast development. Their growth dynamics depends on different factors that must be optimized. Since they get their energy from photosynthesis, light is a key…
The present study investigates different strategies for the treatment of a mixture of digestate from an anaerobic digester diluted and secondary effluent from a high rate algal pond. To this aim, the performance of two photo-sequencing…
In organic semiconductor based bulk heterojunction solar cells, the presence of acceptor increases the formation of charge transfer (CT) excitons, thereby leading to higher exciton dissociation probabilities. In this work we used steady…
Photovoltaic (PV) devices made from blends of a polyarylamine biscarbonate ester (PABC) and [6,6]-phenyl $C_{61}$ butyric acid methyl ester (PCBM) have been fabricated and characterized. PABC is a hole transporting co-polymer prepared from…
We have demonstrated OPV accelerated degradation studies using concentrated sunlight, where the atmosphere, temperature and illumination intensity were independently controlled. Testing various schemes for controlling the sample temperature…
Triplet excitons have been the focus of considerable attention with regards to the functioning of polymer solar cells, because these species are long-lived and quench subsequently generated singlet excitons in their vicinity. The role of…
We address the question of optimization of the biomass long term productivity in the framework of microalgal biomass production in photobioreactors under the influence of day/night cycles. For that, we propose a simple bioreactor model…
The time dependence of device performance has been measured for photocells using blends containing the conjugated polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) with two different functionalized C60 electron…
A strategy based on photo sequencing batch operation was used to select cyanobacteria over unsettled green algae in a wastewater treatment system, evaluating for the first time the effect of hydraulic regimes on nutritional dynamics and…
Biophotovoltaics has emerged as a promising technology for generating renewable energy since it relies on living organisms as inexpensive, self-repairing and readily available catalysts to produce electricity from an abundant resource -…
Twelve single chambered, air-cathode Tubular Microbial Fuel Cells (TMFCs) have been filled up with fruit and vegetable residues. The anodes were realized by means of a carbon fiber brush, while the cathodes were realized through a…
The high-pressure behavior of 3D metal halide chalcogenides (MHPs) has been widely studied. In the field of high-pressure technology, the studies on 3D MHPs have focused on the structural and optical properties, where the optical properties…
Inclusion of heavy metal atoms in a polymer backbone allows transitions between the singlet and triplet manifolds. Interfacial dissociation of triplet excitons constitutes a viable mechanism for enhancing photovoltaic (PV) efficiencies in…