相关论文: Mechanical behavior of InP twinning superlattice n…

The combination of core/shell geometry and band gap engineering in nanowire heterostructures can be employed to realize systems with novel transport and optical properties. Here, we report on the growth of InAs/InP/GaAsSb core-dual-shell…

In recent years, twinned nanopillars have attracted tremendous attention for research due to their superior mechanical properties. However, most of the studies were focused on nanopillars with twin boundaries (TBs) perpendicular to loading…

Here, we show that we control the crystal structure of indium phosphide (InP) nanowires by impurity dopants. We have found that zinc decreases the activation barrier for 2D nucleation growth of zinc-blende InP and therefore promotes the InP…

The topological electronic structure of a single twin boundary and coherent twinning superlattices (TSLs) based on the SnTe class of material is calculated and discussed within a supercell implementation. The superlattices consist of two…

A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6\%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain…

The fracture strength of ZnO nanowires vertically grown on sapphire substrates was measured in tensile and bending experiments. Nanowires with diameters between 60 and 310 nm and a typical length of 2 um were manipulated with an atomic…

The mechanisms of deformation and failure of Cu/Nb nanolaminates manufactured by accumulated roll bonding were analysed using in-situ TEM mechanical tests. Dog-bone small-scale tensile specimens were prepared using a FIB-based technique…

Armchair graphene nanoribbons, when forming a superlattice, can be classified in different topological phases, with or without edge states. By means of tight-binding and classical molecular dynamics (MD) simulations, we studied the…

Understanding the grain boundary deformation dynamics is very crucial to designing materials with stable microstructures. With this quest, the deformation behavior of coherent twin boundary under cyclic shear loading has been studied in…

We measure the stress state in and around a deformation nanotwin in a twinning-induced plasticity (TWIP) steel. Using four-dimensional scanning transmission electron microscopy (4D-STEM), we measure the elastic strain field in a…

The mechanical properties of Cadmium telluride (CdTe) nanowire have become focus of interest now-a-days due to its promising application in opto-electro-mechanical nanodevices. Inthis study, molecular dynamics simulations have been used to…

The recent discovery of excellent thermoelectric properties and topological surface states in SnTe-based compounds has attracted extensive attention in various research areas. Indium doped SnTe is of particular interest because, depending…

Semiconductor nanostructures hold great promise for high-efficiency waste heat recovery exploiting thermoelectric energy conversion, a technological breakthrough that could significantly contribute to providing environmentally friendly…

The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…

We report on the experimental realization of Pb1-xSnxTe pentagonal nanowires (NWs) with [110] orientation using molecular beam epitaxy techniques. Using first-principles calculations, we investigate the structural stability in NWs of SnTe…

Molecular dynamics simulations were performed to understand the role of twin boundaries on deformation behaviour of body-centred cubic (BCC) iron (Fe) nanopillars. The twin boundaries varying from one to five providing twin boundary spacing…

Self assembled AlN nanowires (NWs) are grown by plasma assisted molecular beam epitaxy (PAMBE) on SiO2 / Si (111) substrates. Using a combination of in-situ reflective high energy electron diffraction and ex situ X ray diffraction (XRD), we…

We investigate the deformation and failure mechanisms of phosphorene sheet and nanoribbons under uniaxial tensile strain along the zigzag direction using the density functional tight-binding method. Surprisingly, twin-like deformation…

The vapor-liquid-solid (VLS) mechanism has been applied extensively as a framework for growing single-crystal semiconductor nanowires for applications spanning optoelectronic, sensor and energy-related technologies. Recent experiments have…

The fracture toughness of Al/SiC nanolaminates with different layer thicknesses (in the range 10 to 100 nm) was measured by means of micropillar splitting and bending of a notched beam. The crack plane was perpendicular to the layers in the…