相关论文: Na-ion diffusion and electrochemical performance o…

In recent years, the Na-ion SuperIonic CONductor (NASICON) based polyanionics are considered the pertinent cathode materials in sodium-ion batteries due to their 3D open framework, which can accommodate a wide range of Na content and can…

We report the electrochemical investigation of 5% Al doped MoS$_2$@rGO composite as a high-performance anode for sodium (Na)-ion batteries. The x-ray diffraction (XRD), Raman spectroscopy and high-resolution transmission electron microscopy…

The storage mechanism and diffusion kinetics of Na$_{3}$V$_{2-x}$Ni$_{x}$(PO$_{4}$)$_{2}$F$_{3}$/C ($x=$ 0--0.07) cathodes are investigated through electrochemical impedance spectroscopy (EIS), galvanostatic intermittent titration technique…

Sodium-titanate \ce{Na2Ti3O7} (NTO) is regarded as a highly promising anode material with a very low voltage for Na-ion batteries and capacitors, but suffered from relatively low specific capacity and poor electron conductivity. Here we…

We report the electrochemical performance and diffusion kinetics of a newly designed NASICON type Na$_{3.3}$Mn$_{1.2}$Ti$_{0.75}$Mo$_{0.05}$(PO$_4$)$_3$/C composite material as a cathode for cost-effective sodium-ion batteries. A novel…

We report the electrochemical performance of nanostructures of Na$_{0.66}$V$_4$O$_{10}$ as cathode material for rechargeable batteries. The Rietveld refinement of room temperature x-ray diffraction pattern shows the monoclinic phase with…

We report the electrochemical investigation and study the diffusion kinetics of boron doped Na$_{0.66}$Mn$_{0.8}$Fe$_{0.2}$O$_{2}$ (B-NMFO) cathode materials for sodium-ion batteries. Notably, the B-NMFO cathode exhibits improved specific…

In search of the potential cathode materials for sodium-ion batteries and to understand the diffusion kinetics, we report the detailed analysis of electrochemical investigation of honeycomb structured Na$_{2}$Ni$_{2}$TeO$_{6}$ material…

Sodium-ion batteries (SIBs) have received significant attention as promising alternative for energy storage applications owing to the large availability and low cost of sodium. In this paper we study the electrochemical behavior of…

We report the synthesis, physical properties and electrochemical performance of Zn substituted Na$_{0.44}$Mn$_{1-x}$Zn$_x$O$_2$ ($x=$ 0 -- 0.02) nanostructures as cathode in Na-ion batteries for energy storage applications. These samples…

In recent years, the mixed phosphates based polyanionic electrode materials have attracted great attention in sodium-ion batteries due to their structural stability during cycling and open framework for ion diffusion. Here, we report the…

The efficient energy storage devices are crucial to meet the soaring global energy demand for sustainable future. Recently, the sodium-ion batteries (SIBs) have emerged as one of the excellent cost effective solution due to the uniform…

We demonstrate that for polycrystalline LiNi0.33Mn0.33Co0.33O2 c-axis textured thin film cathodes of rechargeable lithium-ion batteries, the kinetics of Li storage and release including maximum specific capacity is determined by Li…

We describe Na0.67Mn0.625Fe0.25Co0.125O2 (NMFCO), a P2-type sodium-ion battery cathode. Our composition, with significantly less Co than in an earlier study, shows discharge capacity close to 190 mAhg-1 and specific energy density exceeding…

We report the electrochemical sodium-ion kiinetics and distribution of relaxation time (DRT) analysis of a newly designed mixed polyanionic NaFe$_{1.6}$V$_{0.4}$(PO$_{4}$)(SO$_{4}$)$_{2}$@CNT composite as a cathode. The specific capacity of…

A major challenge in the development of new battery materials is understanding their fundamental mechanisms of operation and degradation. Their microscopically inhomogeneous nature calls for characterization tools that provide operando and…

We report the exfoliation of layered Na2Ti3O7, a promising anode material for Na-ion batteries, and restacking using HNO3 and NaOH to form H-Ti3O7 and Na(x)-Ti3O7 compositions, respectively. The materials were characterised by a range of…

Na, K and Ca-ion battery electrode materials with appropriate electrochemical properties are desirable candidates for replacing lithium-ion batteries (LIBs) because of their natural richness and low cost. Recently, MoO2 has been reported as…

We designed a high-entropy doped NASICON cathode, Na$_3$V$_{1.9}$(CrMoAlZrNi)$_{0.1}$(PO$_4$)$_3$ and investigate its electrochemical performance for sodium-ion batteries (SIBs) to understand the diffusion mechanism including distribution…

Despite significant potential as energy storage materials for electric vehicles due to their combination of high energy density per unit cost and reduced environmental and ethical concerns, Co-free lithium ion batteries based off layered Mn…