相关论文: Experimental and simulated Performance of Hot Mirr…
We investigate the increase of the DEM (differential emission measure) towards the chromosphere due to small and cool magnetic loops (height $\lesssim8$~Mm, $T\lesssim10^5$~K). In a previous paper we analysed the conditions of existence and…
Optimal radiator thermal emission spectra maximizing thermophotovoltaic (TPV) conversion efficiency and output power density are determined when temperature effects in the cell are considered. To do this, a framework is designed in which a…
We propose a simple way to improve the laser gravitational-wave detectors sensitivity by means of reduction of the number of reflective coating layers of the core optics mirrors. This effects in the proportional decrease of the coating…
The thermal management of an outdoor electronic enclosure can be quite challenging due to the additional thermal load from the sun and the requirement of having an air-sealed enclosure. It is essential to consider the effect of solar…
We demonstrate a simple and robust geometry for optical trapping in vacuum of a single nanoparticle based on a parabolic mirror and the optical gradient force, and we demonstrate rapid parametric feedback cooling of all three motional…
In this study we considered a solar sail coated with materials that undergo thermal desorption at a specific temperature, as a result of heating by solar radiation at a particular heliocentric distance. Three different scenarios, that only…
We report the reduction of the thermal lensing in cryogenic sapphire mirrors, which is planed to be used in the Large scale Cryogenic Gravitational wave Telescope (LCGT) project. We measured three key parameters of sapphire substrate for…
The bi-layered structure has drawn a wide interest due to its good performance in solar steam generation. In this work, we firstly develop a calculation model which could give a good prediction of experimental results. Then, this model is…
We establish a new approach for pump-probe simulations of metallic metamaterials coupled to the gain materials. It is of vital importance to understand the mechanism of the coupling of metamaterials with the gain medium. Using a four-level…
Drying is an important agricultural process, particularly for crops, and shriveled products are used all over the world. The performance of drying green chili was also tested in this article, which created an alternate way of drying…
The output port of GEO 600 is dominated by unwanted high order modes (HOMs). The current thermal actuation system, a ring heater behind one of the folding mirrors, causes a significant amount of astigmatism, which produces HOMs. We have…
A laser beam directed at a mirror attached onto a flexible mount extracts thermal energy from its mechanical Brownian motion by Doppler effect. For a normal mirror the efficiency of this Doppler cooling is very weak and masked by laser…
Plasmonic absorption of light can lead to significant local heating in metallic nanostructures, an effect that defines the sub-field of thermoplasmonics and has been leveraged in diverse applications from biomedical technology to…
Grating reflectors have been repeatedly discussed to improve the noise performance of metrological applications due to the reduction or absence of any coating material. So far, however, no quantitative estimate on the thermal noise of these…
We consider mid-infrared (5 to 25 micrometers), optically cooled detectors based on a microcantilever sensor of the radiation pressure. A significant enhancement of sensitivity is achieved due the combination of low effective temperature…
Detection of infrared (IR) photons in a room-temperature IR camera is carried out by a two-dimensional array of microbolometer pixels which exhibit temperature-sensitive resistivity. When IR light coming from the far-field is focused onto…
Thermodynamical fluctuations of temperature in mirrors may produce surface fluctuations not only through thermal expansion in mirror body but also through thermal expansion in mirror coating. We analyze the last "surface" effect which can…
This paper deals with an analytical modeling of heat transfers simulating a new radiation calorimeter operating in a temperature range from -50 {\deg}C to 150 {\deg}C. The aim of this modeling is the evaluation of the feasibility and…
A fundamental limit of current radiative cooling systems is that only the top surface facing deep-space can provide the radiative cooling effect, while the bottom surface cannot. Here, we propose and experimentally demonstrate a concept of…
The advent of the silicon photomultiplier has allowed the development of highly segmented calorimeters using plastic scintillator as the active media, with photodetectors embedded in the calorimeter, in dimples in the plastic. To reduce the…