相关论文: Low intensity noise high-power tunable fiber-based…

We have developed a Watt-level single-frequency tunable fiber laser in the 915-937 nm spectral window. The laser is based on a neodymium-doped fiber master oscillator power amplifier architecture, with two amplification stages using a 20 mW…

We demonstrate a high power, all-fiber, tunable laser source that can operate in the L-band region. A low power, tunable input laser is amplified with a recently proposed, high efficiency, 6th order cascaded Raman amplifier. The proposed…

High-power ultra-low noise single-mode single-frequency lasers are in great demand for interferometric metrology. Robust, compact all-fiber lasers represent one of the most promising technologies to replace the current laser sources in use…

An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam…

An optical parametric chirped pulse amplifier fully based on Yb lasers at 500 kHz is described. Passive optical-synchronization is achieved between a fiber laser-pumped white-light and a 515 nm pump produced with a 200 W picosecond Yb:YAG…

By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably,…

An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam…

We present the development of a high power fibre laser system to investigate its suitability for use in a transverse electron beam profile monitor i.e. a laserwire. A system capable of producing individual pulses up to $165.8 \pm 0.4 \mu$J…

We describe a tunable broadband mid-infrared laser source based on difference-frequency mixing of a 100 MHz femtosecond Yb:fiber laser oscillator and a Raman-shifted soliton generated with the same laser. The resulting light is tunable over…

Erbium (Er) ions are the gain medium of choice for fiber-based amplifiers and lasers, offering a long excited-state lifetime, slow gain relaxation, low amplification nonlinearity and noise, and temperature stability compared to…

Large amounts of hyperpolarized 3He gas with high nuclear polarization rates are required for use in neutron spin filters or nuclear magnetic resonance imaging of human lung. Very high efficiency can be obtained by metastability exchange…

A modified Coherent 899-21 titanium sapphire laser is injection locked to produce 6-6.5 W of single-frequency light at 852 nm. After closed-loop amplitude control and frequency stabilization to a high-finesse cavity, it delivers 4-4.5 W…

We have developed a linearly-polarized Ytterbium-doped fiber ring laser with single longitudinal-mode output at 1064nm for LISA and other space applications. Single longitudinal-mode selection was achieved by using a fiber Bragg grating…

An ultrafast fiber chirped-pulse amplifier comprising 8 coherently combined amplifier channels is presented. The laser delivers 1 kW average power at 1 mJ pulse energy and 260 fs pulse duration. Excellent beam quality and low noise…

We propose a simple approach to implement a tunable, high power and narrow linewidth laser source based on a series of highly coherent tones from an electro-optic frequency comb and a set of 3 DFB slave lasers. We experimentally demonstrate…

This work demonstrates a broadband tunable narrow-linewidth laser based on scattering-enhanced fiber, covering the E-S-C-L wavelength bands from 1337.47 nm to 1631.39 nm, with a total tuning span of 293.92 nm. The laser employs two…

We demonstrated all-fiber amplification of 11 ps pulses from a gain-switched laser diode at 1064 nm. The diode was driven at a repetition rate of 40 MHz and delivered 13 $\mu$W of fiber-coupled average output power. For the low output pulse…

We report on an ytterbium-free erbium-doped aluminophosphosilicate all-fiber laser, producing an output power of 25 W at a wavelength of 1584 nm with a slope efficiency of 30% with respect to the 976 nm absorbed pump power. The simple…

We present a narrow linewidth continuous laser source with over 11 Watts of output power at 780nm, based on single-pass frequency doubling of an amplified 1560nm fibre laser with 36% efficiency. This source offers a combination of high…

We have developed a Watt-level random laser at 532 nm. The laser is based on a 1064 nm random distributed ytterbium-gain assisted fiber laser seed with a 0.35 nm line-width 900mW polarized output power. A study for the optimal length of the…