相关论文: Interlaminar toughening in structural carbon fiber…
The introduction of nanostructured interlayers is one of the most promising strategies for interlaminar reinforcement in structural composites. In this work, we study the failure mechanism and interlayer microstructure of aerospace-grade…
Delamination is one of the major concerns for carbon fiber reinforced polymer (CFRP) composites. Improving fracture toughness reduces delamination and allows for the creation of multifunctional CFRP. In this study, polyaniline (PANI) coated…
In building up composite structures using carbon nanotube (CNT) fibers, the fiber-to-matrix interfacial shear strength (IFSS) is one of the most important issues. Originating from the assembly characteristics of CNT fiber, the IFSS strongly…
The atomistic simulations of carbon nanotube (CNT) - carbon reinforced composite material are reported. The studied composite samples were obtained by impregnating certain amounts of CNTs (3,3) and (6,6) into pristine graphite matrix. The…
Carbon nanotube fibers are materials with an exceptional combination of properties, including higher toughness than carbon fibers, electrical conductivity above metals, large specific surface area (250 $\frac{m^2}{g}$) and high…
The ultra-low intershell shear strength in carbon nanotubes (CNTs) has been the primary obstacle to applications of CNTs as mechanical reinforcements. In this paper we propose a new CNT-system composed of comprising of coaxial cylindrical…
Corrosion is an inevitable phenomenon that is inherent in metals and even though there has been significant research on this subject, no ideal protection has been discovered to fully prevent corrosion. However, methods such as using…
Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer…
Carbon nanotubes (CNT) have been recently proposed as stabilizers against grain growth that can happen even at low temperature inputs in nano-crystalline and ultrafine-grained materials obtained by severe plastic deformation. In this study,…
Carbon nanotube (CNT) fiber is formed by assembling millions of individual tubes. The assembly feature provides the fiber with rich interface structures and thus various ways of energy dissipation, as reflected by the non-zero loss tangent…
Interface widely exists in carbon nanotube (CNT) assembly materials, taking place at different length scales. It determines severely the mechanical properties of these assembly materials. Here I assess the mechanical properties of…
This study sequentially investigates the enhancement of fracture behavior in adhesive joints. Initially, mechanical sanding techniques were explored, revealing significant improvements of 55% in fracture energy and 38% in load-bearing…
Carbon Nanotubes (CNTs)-polymer composites are promising candidates for a myriad of applications. Ad-hoc CNTs-polymer composite fabrication techniques inherently pose roadblock to optimized processing resulting in microstructural defects…
Recent advances in nanotechnology have provided new materials which have the potential to surpass copper and aluminum alloys in electrical conductivity, weight and ampacity [2-6]. Among these carbon nanotubes (CNTs) stand out due to their…
Carbon nanotube (CNT) fibres are firmly established as a new high-performance fibre, but their tensile mechanical properties remain a relatively small fraction of those of the constituent CNTs. Clear structure-property relations and…
Although individual carbon nanotubes (CNTs) are superior as constituents to polymer chains, the mechanical and thermal properties of CNT fibers (CNTFs) remain inferior to commercial synthetic fibers due to the lack of synthesis methods to…
We present a novel micromechanics-based phase field approach to model crack initiation and propagation in carbon nanotube (CNT) based composites. The constitutive mechanical and fracture properties of the nanocomposites are first estimated…
Interfacial friction plays a crucial role in the mechanical properties of carbon nanotube based fibers, composites, and devices. Here we use molecular dynamics simulation to investigate the pressure effect on the friction within carbon…
Controlled growth, patterning and placement of carbon nanotube (CNT) thin films for electronic applications are demonstrated. The density of CNT films is controlled by optimizing the feed gas composition as well as the concentration of…
Carbon nanotube (CNT) reinforced metal matrix composites have been the focus of researchers due to their high load-bearing capacity. Among single and multi-wall carbon nanotubes (MWCNT), the latter is preferred by manufacturers and…