相关论文: Transmit MIMO Radar Beampattern Design Via Optimiz…

This paper explores an overlapped-multiple-input multiple-output (MIMO) antenna architecture and a spectrum sharing algorithm via null space projection (NSP) for radar-communications coexistence. In the overlapped-MIMO architecture, the…

In this paper, we investigate the hybrid beamforming design for a multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system, where a multi-antenna base station (BS) with hybrid analog-digital transmit antenna…

Frequency diverse array (FDA) differs from conventional array techniques in that it imposes an additional frequency offset (FO) across the array elements. The use of FO provides the FDA with the controllable degree of freedom in range…

As a key enabling technology for 5G wireless, millimeter wave (mmWave) communication motivates the utilization of large-scale antenna arrays for achieving highly directional beamforming. However, the high cost and power consumption of RF…

In millimeter-wave communications, multiple-input-multiple-output (MIMO) systems use large antenna arrays to achieve high gain and spectral efficiency. These massive MIMO systems employ hybrid beamformers to reduce power consumption…

We present the design and hardware implementation of a radar prototype that demonstrates the principle of a sub-Nyquist collocated multiple-input multiple-output (MIMO) radar. The setup allows sampling in both spatial and spectral domains…

A multiple input, multiple output (MIMO) radar emits probings signals with multiple transmit antennas and records the reflections from targets with multiple receive antennas. Estimating the relative angles, delays, and Doppler shifts from…

Joint radar and communication (RadCom) systems have been proposed to achieve the spectrum sharing between radar and communication in recent years. However, the joint RadCom systems cause the clutter modulation and the performance…

This paper studies the coordinated beamforming design problem for the multiple-input single-output (MISO) interference channel, assuming only channel distribution information (CDI) at the transmitters. Under a given requirement on the rate…

Motivated by massive deployment of low data rate Internet of things (IoT) and ehealth devices with requirement for highly reliable communications, this paper proposes receive beamforming techniques for the uplink of a single-input…

Reconfigurable intelligent surfaces (RISs) are an emerging technology for improving spectral efficiency and reducing power consumption in future wireless systems. This paper investigates the joint design of the transmit precoding matrices…

For massive MIMO public channel with any sector size in either microwave or millimeter wave (mmwave) band, this paper studies the beamforming design to minimize the transmit power while guaranteeing the quality of service (QoS) for randomly…

Multiple-input multiple-output (MIMO) radars transmit a set of sequences that exhibit small cross-correlation sidelobes, to enhance sensing performance by separating them at the matched filter outputs. The waveforms also require small…

We consider a multi-user (MU) full-duplex (FD) multiple-input multiple-output (MIMO) communication system, in which the base station transceiver is equipped with transmit and receive position reconfigurable antennas (PRAs) to mitigate both…

This paper addresses the optimization challenges in Ultra-Massive MIMO communication systems, focusing on array selection and beamforming in dynamic and diverse operational contexts. We introduce a novel array selection criterion that…

We investigate an alternative solution method to the joint signal-beamformer optimization problem considered by Setlur and Rangaswamy[1]. First, we directly demonstrate that the problem, which minimizes the received noise, interference, and…

We consider the joint constellation design problem for the noncoherent multiple-input multiple-output multiple-access channel (MAC). By analyzing the noncoherent maximum-likelihood detection error, we propose novel design criteria so as to…

Efficient implementation of massive multiple-input-multiple-output (MIMO) transceivers is essential for the next-generation wireless networks. To reduce the high computational complexity of the massive MIMO transceiver, in this paper, we…

Millimeter-wave vehicular networks incur enormous beam-training overhead to enable narrow-beam communications. This paper proposes a learning and adaptation framework in which the dynamics of the communication beams are learned and then…

The joint detection and tracking of a moving target embedded in an unknown disturbance represents a key feature that motivates the development of the cognitive radar paradigm. Building upon recent advancements in robust target detection…