相关论文: Energy and RF Cavity Phase Symmetry Enforcement in…
Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct…
High average current, transportable energy recovery linacs (ERLs) can be very attractive tools for a number of applications including next generation high-luminosity, compact light sources. Conventional ERLs are based on an electron beam…
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration…
In order for sources of coherent high brightness and intensity THz and X-Ray radiation to be accepted by university or industrial R&D laboratories, truly compact, high current and efficient particle accelerators are required. The demand for…
Any proposal for an accelerator facility based upon a multipass Energy Recovery Linac (ERL) must possess a self-consistent match in longitudinal phase space, not just transverse phase space. We therefore present a semi-analytic method to…
A superconducting linear accelerator operating in continuous-wave mode could produce X-ray free electron lasers (XFEL) at megahertz repetition rate, with the capability that delivering wide spectral range coherent radiation to multi end…
The LHeC provides an intense, high energy electron beam to collide with the LHC. It represents the highest energy application of energy recovery linac (ERL) technology which is increasingly recognized as one of the major pilot technologies…
Energy Recovery Linacs provide high-energy beams, but decelerate those beams before dumping them, so that their energy is available for the acceleration of new particles. During this deceleration, any relative energy spread that is created…
Energy recovering an electron beam after it has participated in a free-electron laser (FEL) interaction can be quite challenging because of the substantial FEL-induced energy spread and the energy anti-damping that occurs during…
Energy recovery linac (ERL) holds great promise for generating high repetition-rate and high brightness electron beams. The application of ERL to drive a free-electron laser is currently limited by its low peak current. In this paper, we…
Suppression of beam losses is essential for successful operation of high-intensity linac. Historically, the values of the field amplitudes and phases of the side-coupled, 805-MHz LANSCE linac modules are maintained using a well-known…
Here we will derive the general theory of the beam-breakup instability in recirculating linear accelerators, in which the bunches do not have to be at the same RF phase during each recirculation turn. This is important for the description…
Multigap cavities are used extensively in linear accelerators to achieve velocities up to a few percent of the speed of light, driving nuclear physics research around the world. Unlike for single-gap structures, there is no closed-form…
This paper uses theory and simulation of the Beam Break-Up instability (BBU) for multi-turn ERLs to determine and to optimize the current limit of the Cornell Brookhaven Energy-Recovery-Linac Test Accelerator (CBETA). Currently under…
The seminar on energy recovery linacs (ERLs) is giving an overview of the field: How does an ERL work? What have been important milestones in ERL history? What are the reasons to use an ERL instead of a conventional accelerator? As examples…
Generally, Energy Recovery Linac (ERL) needs special designed high current superconducting RF cavities. In this paper, the threshold current of BBU for compact ERL facilities with 9-cell Tesla type cavities are investigated. The results…
Beam breakup instability is a potential issue for all particle accelerators and is often the limiting factor for the maximum beam current that can be achieved. This is particularly relevant for Energy Recovery Linacs with multiple passes…
A compact energy-recovery linac (cERL) has been un-der construction at KEK since 2009 to develop key technologies for the energy-recovery linac. The cERL began operating in 2013 to create a high-current beam with a low-emittance beam with…
Recirculating energy recovery linacs are a promising technology for delivering high power particle beams ($\sim$GW) while only requiring low power ($\sim$kW) RF sources. This is achieved by decelerating the used bunches and using the energy…
Energy-frontier accelerators provide powerful tools performing high precision measurements confirming the fundamental of the physics and broadening new research horizons. Such machines are either driven by circular or linear accelerators.…