相关论文: A hybrid silicon-sapphire cryogenic Fabry-Perot ca…

We report on the development of a sub-kelvin, single-crystal silicon Fabry-Perot cavity. Operating such a cavity below 1~K should reduce the thermal noise limit of the cavity, and by this way address the current limitations of ultrastable…

We describe a cryogenic cavity-optomechanical system that combines Si3N4 membranes with a mechanically-rigid Fabry-Perot cavity. The extremely high quality-factor frequency products of the membranes allow us to cool a MHz mechanical mode to…

We report on the cryogenic properties of a low-contraction silicon-aluminum composite, namely Japan Fine Ceramics SA001, to use as a packaging structure for cryogenic silicon devices. SA001 is a silicon--aluminum composite material (75%…

High-purity glasses are used for their low optical and mechanical loss, which makes them an excellent material for oscillators in optical systems, such as inertial sensors. Complex geometries often require the assembly of multiple pieces of…

Superconducting radio-frequency cavities are commonly used in modern particle accelerators for applied and fundamental research. Such cavities are typically made of high-purity, bulk Nb and are cooled by a liquid helium bath at a…

The frequency stability of a laser locked to an optical reference cavity is fundamentally limited by thermal noise in the cavity length. These fluctuations are linked to material dissipation, which depends both on the temperature of the…

Cryogenic ultra-stable lasers have extremely low thermal noise limits and frequency drifts, but they are more seriously affected by vibration noise from cryostats. Main material candidates for cryogenic ultra-stable cavities include silicon…

Silicon double paddle osillators (DPO) have been successfully used for measuring the elastic properties of amorphous films down to 10 mK (see for example \cite{Fefferman16,Liu14}). Until now, our group has used a wet dilution refrigerator…

The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the…

Experiments were performed with Fabry-Perot optical resonators in vacuum at low temperatures. Mirrors were applied on substrates of various optical materials. The infrared laser with a wavelength of 1.064 microns was used. The pump power at…

Resonance modes in single crystal sapphire ($\alpha$-Al$_2$O$_3$) exhibit extremely high electrical and mechanical Q-factors ($\approx 10^9$ at 4K), which are important characteristics for electromechanical experiments at the quantum limit.…

Superconductivity is observed with critical temperature $T_{c}$ = 2.0 K in self-flux-grown single crystals of $CaBi_{2}$. This material adopts the $ZrSi_{2}$ structure type with lattice parameters a = 4.696(1) $\AA$, b = 7.081(2) $\AA$ and…

The thermal transport properties of porous silicon and nano-hybrid "porous silicon/water" systems are presented here. The thermal conductivity was evaluated with equilibrium molecular dynamics technique for porous systems made of spherical…

The recent reports on high-temperature superconductivity above 190 K in hydrogen sulfide at 200 GPa pressure, exceeding all previously discovered superconductors, has greatly invigorated the interest in dense hydrogen-rich solids. In this…

We report on the fabrication and characterization of a Fabry-Perot microcavity enclosing a thin diamond membrane at cryogenic temperatures. The cavity is designed to enhance resonant emission of single nitrogen-vacancy centers by allowing…

In this letter, we report the measurement of the coefficient of thermal expansion (CTE) of single-crystal silicon from 655 mK to 16 K using an ultra-stable laser based on a single-crystal silicon Fabry-Perot cavity. Below 1 K temperatures,…

We present the design and commissioning of a cryogenic low-vibration test facility that measures displacement noise from a gram-scale silicon cantilever at the level of 10$^{-16}\, \mathrm{m/\sqrt{Hz}}$ at 1kHz. A volume of $\sim$36 litres…

V$_3$Si thin films are known to be superconducting with transition temperatures up to 15 K, depending on the annealing temperature and the properties of the substrate underneath. Here we investigate the film structural properties with the…

Open-access microcavities are a powerful tool to enhance light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously…

Silicon is a key semiconducting material for electrical devices and hybrid quantum systems where low temperatures and zero-spin isotopic purity can enhance quantum coherence. Electrical conductivity in Si is characterised by carrier freeze…