相关论文: Pulse-to-pulse wavelength switchting of diode base…
Many experiments in biological and medical sciences currently use multiphoton microscopy as a core imaging technique. To date, solid-state lasers are most commonly used as excitation beam sources. However, the most demanding applications…
We describe a fiber Raman amplifier for nanosecond and sub-nanosecond pulses centered around 1260 nm. The amplification takes place inside a 4.5-m-long polarization-maintaining phosphorus-doped fiber, pumped at 1080 nm by 3-ns-long pulses…
Multi-photon microscopy is a powerful tool in biomolecular research. Less complex and more cost effective excitation light sources will make this technique accessible to a broader community. Especially semiconductor diode seeded fiber…
Multiphoton microscopy has enabled us to image cellular dynamics in vivo. However, the excitation wavelength for imaging with commercially available lasers is mostly limited between 650-1040 nm. Here we develop a femtosecond fiber laser…
Here, we demonstrate all-fiber direct amplification of 11 picosecond pulses from a gain-switched laser diode at 1063nm. The diode was driven at a repetition rate of 40MHz and delivered 13$\mu$W of fiber-coupled average output power. For the…
Broad and safe access to ultrafast laser technology has been hindered by the absence of optical fiber-delivered pulses with tunable central wavelength, pulse repetition rate, and pulse width in the picosecond-femtosecond regime. To address…
Two-photon microscopy (TPM) enables deep tissue imaging but requires excitation pulses that have a large product of average and peak power, typically supplied by femtosecond solid-state lasers. However, these lasers are bulky and…
Multimode fibers (MMFs) have recently reemerged as attractive avenues for nonlinear effects due to their high-dimensional spatiotemporal nonlinear dynamics and scalability for high power. High-brightness MMF sources with effective control…
We report the first demonstration to our knowledge of a continuously tunable picosecond laser operating around 1 MHz. The emission can be tuned from 640 to 685 nm and the repetition rate from 200 kHz to 1 MHz with a pulse duration of less…
A series of simple and low-cost devices for switching, amplifying, and chirping diode lasers based on current modulation are presented. Direct modulation of diode laser currents is rarely sufficient to establish precise amplitude and phase…
We demonstrate a compact watt-level all polarization-maintaining (PM) femtosecond fiber laser source at 1100 nm. The fiber laser source is seeded by an all PM fiber mode-locked laser employing a nonlinear amplifying loop mirror. The seed…
Multiphoton microscopes employ femtosecond lasers as light sources because the high peak power of the ultrashort pulse allows for multiphoton excitation of fluorescence in the examined sample. However, such short pulses are susceptible to…
We demonstrate a fiber system which amplifies and compresses pulses from a gain-switched diode. A Mamyshev regenerator shortens the pulses and improves their coherence, enabling subsequent amplification by parabolic pre-shaping. As a…
A femtosecond frequency-doubled Erbium-doped fiber laser with adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm…
Maximizing nonlinear light-matter interactions is a primary motive for compressing laser pulses to achieve ultrashort transform limited pulses. Here we show how, by appropriately shaping the pulses, resonant multiphoton transitions can be…
Ultrafast lasers are becoming increasingly widespread in science and industry alike. Fiber-based ultrafast laser sources are especially attractive because of their compactness, alignment-free setups, and potentially low costs. However,…
Nonlinear amplification is a powerful technique for generating ultrashort laser pulses with high peak power in fiber systems. However, the diversity of nonlinear amplification approaches and their inherent complexities present significant…
An exciting recent development for deep-tissue imaging with cellular resolution is three-photon fluorescence microscopy (3PM) with excitation at long wavelengths (1300 and 1700 nm). In the last few years, long-wavelength 3PM has driven…
We describe a system for generating frequency-chirped and amplitude-shaped pulses on time scales from sub-nanosecond to ten nanoseconds. The system starts with cw diode-laser light at 780 nm and utilizes fiber-based electro-optical phase…
We experimentally demonstrate a novel nonlinear effect in optical fibers: upconversion luminescence generation excited by multiphoton absorption of femtosecond infrared pulses. We directly estimate the average number of photons involved in…