相关论文: Tubeless Siphon Flow of Room Temperature Liquid Me…
The room temperature liquid metal is quickly emerging as an important functional material in a variety of areas like chip cooling, 3D printing or printed electronics etc. With diverse capabilities in electrical, thermal and flowing…
The past few years have witnessed the rapid development of liquid metal dealloying to fabricate nano-/meso-scale porous and composite structures with ultra-high interfacial area for diverse materials applications. However, this method…
We study the axial flow of a nonviscous and incompressible fluid in a circular tube made from an electromechanical material. The tube is driven into radial motion by an electric voltage across its thickness. A theoretical analysis is…
This article deals with the flow of Newtonian fluids through axially-symmetric corrugated tubes. An analytical method to derive the relation between volumetric flow rate and pressure drop in laminar flow regimes is presented and applied to…
Liquid has a significant effect on the flow of wet granular assemblies. We explore the effects of liquid induced cohesion on the flow characteristics of wet granular materials. We propose a cohesion-scaling approach that enables invariant…
In this article we present an analytical method for deriving the relationship between the pressure drop and flow rate in laminar flow regimes, and apply it to the flow of power-law fluids through axially-symmetric corrugated tubes. The…
We have developed and characterized two novel micro flow sensors based on measuring the electrical impedance of the interface between the flowing liquid and metallic electrodes embedded on the channel walls. These flow sensors are very…
The unusually high surface tension of room temperature liquid metal is molding it as unique material for diverse newly emerging areas. However, unlike its practices on earth, such metal fluid would display very different behaviors when…
When a liquid flows down a vertical tube at a low flowrate, it may not be able to completely cover the surface as a film, and the flow will comprise a number of rivulets separated by unwetted areas. Predictions of the minimum film thickness…
Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic…
In this study, using non-equilibrium molecular dynamics simulation, the flow of water in deformed carbon nanotubes is studied for two water models TIP4P/2005 and SPC/FH. The results demonstrated a non-uniform dependence of the flow on the…
The range of the magnitude of the liquid viscosity as a function of the temperature (T) is one of the most impressive of any physical property, changing by approximately 17 orders of magnitude from its extrapolated value at infinite…
Air-permeable porous media hosts air within their pores. Upon removal from the interior of the material, these porous media have the tendency to reabsorb air from the surrounding, acting as a suction pump. Therefore, the technique used to…
We study immiscible two-phase flow of a compressible and an incompressible fluid inside a capillary tube of varying radius under steady-state conditions. The incompressible fluid is Newtonian and the compressible fluid is an inviscid ideal…
The thermo-mechanical effect in superfluid helium is used to create an initial chemical potential difference, $\Delta \mu_0$, across a solid $^4$He sample. This $\Delta \mu_0$ causes a flow of helium atoms from one reservoir filled with…
This paper discusses the convective heat transfer enhancement of non-condensing slug flows by using phase separation for local liquid circulations through a porous-tube insert. Numerical simulations were carried out to study the air-water…
Transitional pipe flow is modeled as a one-dimensional excitable and bistable medium. Models are presented in two variables, turbulence intensity and mean shear, that evolve according to established properties of transitional turbulence. A…
Injecting a non-dissolvable gas into a saturated liquid results in sub-cooling of the liquid due to forced evaporation into the bubble. Previous studies assumed the rate of evaporation of liquid into the bubble to be independent of the…
We study the leakage of air in syringes with Teflon coated rubber stopper and glass barrel. The leakrate depends on the interfacial surface roughness, the viscoelastic properties of the rubber and on the elastoplastic properties of the…
The exact analytic solution is built for the plane flow of incompressible fluid through the wheel with profiles of blades approximating logarithmic spirals.