相关论文: On mixed-mode fracture mechanics models for contac…
As recently suggested in an interestring and stimulating paper by Menga, Carbone & Dini (MCD), applying fracture mechanics energy concepts for the case of a sliding adhesive contact, imposing also the shear stress is constant at the…
This paper gives a theoretical analysis for the fundamental problem of anisotropy induced by shear forces onan adhesive contact, discussing the experimental data of the companion Letter. We present a fracture mechanicsmodel where two…
Contact mechanics-based models for the friction of nominally flat rough surfaces have not been able to adequately capture certain key experimentally observed phenomenona, such as the transition from a static friction peak to a lower level…
We present a newly developed approach for the calculation of interfacial stiffness and contact area evolution between two rough bodies exhibiting self affine surface structures. Using spline assisted discretization to define localised…
The friction and adhesion between elastic bodies are strongly influenced by the roughness of the surfaces in contact. Here we develop a multiscale molecular dynamics approach to contact mechanics, which can be used also when the surfaces…
This paper presents a framework for modeling failure in quasi-brittle geomaterials under different loading conditions. A micromechanics-based model is proposed in which the field variables are linked to physical mechanisms at the microcrack…
Contact involving soft materials often combines dry adhesion, sliding friction, and large deformations. At the local level, these three aspects are rarely captured simultaneously, but included in the theoretical models by Mergel et al.…
The classical Hertzian contact model establishes a monotonic correlation between contact force and area. Here, we showed that the interplay between local friction and structural instability can deliberately lead to unconventional contact…
We introduce a phase-field method for continuous modeling of cracks with frictional contacts. Compared with standard discrete methods for frictional contacts, the phase-field method has two attractive features: (1) it can represent…
We study the onset of friction for rough contacting blocks whose interface is coated with a thin lubrication layer. High speed measurements of the real contact area and stress fields near the interface reveal that propagating shear cracks…
The method of iterated conformal maps is developed for quasi-static fracture of brittle materials, for all modes of fracture. Previous theory, that was relevant for mode III only, is extended here to mode I and II. The latter require…
The key parameter for describing frictional strength at the onset of sliding is the static friction coefficient. Yet, how the static friction coefficient emerges at the macroscale from contacting asperities at the microscale is still an…
We present a complete numerical analysis for a general discretization of a coupled flow-mechanics model in fractured porous media, considering single-phase flows and including frictionless contact at matrix-fracture interfaces, as well as…
We develop two new continuum contact models for coupled adhesion and friction, and discuss them in the context of existing models proposed in the literature. Our new models are able to describe sliding friction even under tensile normal…
The friction force observed at macroscale is the result of interactions at various lower length scales that are difficult to model in a combined manner. For this reason, simplified approaches are required, depending on the specific aspect…
We study the relation between a threshold-force based model at the microscopic scale and mode I fracture at the macroscopic scale in a system of discrete interacting springs. Specifically, we idealize the contact between two surfaces as…
Soft polymers are ubiquitous materials in nature and as engineering materials with properties varying from rate-independent to rate-dependent. Current fracture toughness measures are non-unique for rate-dependent soft materials for varying…
Traditional laws of friction believe that the friction coefficient of two specific solids takes constant value. However, molecular simulations revealed that the friction coefficient of nanosized asperity depends strongly on contact size and…
The problem of a crack impinging on an interface has been thoroughly investigated in the last three decades due to its important role in the mechanics and physics of solids. In this investigation, this problem is revisited in view of the…
Engineering wear models are generally empirical and lack connections to the physical processes of debris generation at the nanoscale to microscale. Here, we thus analyze wear particle formation for sliding interfaces in dry contact with…