相关论文: Morphological, nanostructural, and compositional e…
The temporal evolution of ordered gamma prime (L12)-precipitates precipitating in a disordered gamma(f.c.c.) matrix is studied in extensive detail for a Ni-12.5 Al at.% alloy aged at 823 K (550 oC), for times ranging from 0.08 to 4096 h.…
The temporal evolution of ordered gamma-prime(L12)-precipitates and the compositional trajectories during phase-separation of the gamma(face-centered-cubic(f.c.c.)) and gamma-prime(L12)-phases are studied in a…
The compositional diffusional-trajectories for a phase separation of gamma(f.c.c.)/gamma-prime(L12) phases are studied in a quaternary Ni-10Al-8.5Cr-2Re alloy, aged at 700 deg.C for 0 to 1024 h, utilizing atom-probe tomography (APT). As the…
Ti$_{1-x-y}$Al$_{x}$Zr$_{y}$N cubic alloys within the 25-70\% Al composition range have high age-hardening capabilities due to metastable phase transition pathways at high temperatures. They are thus ideal candidates for ultra-hard…
In the present study, correlative transmission Kikuchi diffraction transmission electron microscopy (TKD-TEM) measurements, atom probe tomography (APT), and density functional theory (DFT) calculations are used to reveal the elemental…
The phase stability of NiAl clusters of nanometer size was studied by using the embedded atom model and Monte Carlo simulation techniques. For temperatures of 500 and 1000 K and for a range of compositions below 70 at.% Al, the equilibrium…
While developing nuclear materials, predicting their behavior under long-term irradiation regimes spanning decades poses a significant challenge. We developed a novel Kinetic Monte Carlo (KMC) model to explore the precipitation behavior of…
The effect of adding 2 at.% W to a model Ni-Al-Cr superalloy on the morphological evolution, spatial correlations and temporal evolution of g'(L12)-precipitates at 1073 K is studied with scanning electron microscopy and atomic force…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
The spatial distribution and morphology of precipitates formed during aging are key factors that determine the precipitation hardening response of various magnesium-rare earth alloys. In recent years, the use of high-performance computing…
The kinetic pathways resulting from the formation of coherent L12-ordered y'-precipitates in the g-matrix (f.c.c.) of Ni-7.5 Al-8.5 Cr at.% and Ni-5.2 Al-14.2 Cr at.% alloys, aged at 873 K, are investigated by atom-probe tomography (APT)…
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys. Early stages of precipitation are particularly important from the fundamental…
Nucleation and growth of Ti$_3$Al \textalpha{}$_2$ ordered domains in \textalpha{}-Ti--Al--X alloys were characterised using a combination of transmission electron microscopy, atom probe tomography and small angle X-ray scattering. Model…
The present study reports on the structure formation in thin epitaxial nickel-aluminum films (Ni1-xAlx; Al atomic fraction x up to x=0.24) grown on MgO(001) substrates by magnetron sputtering. Experimental and computational data demonstrate…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
The microstructural stability and mechanical properties of superalloys at high temperatures are significantly influenced by the composition and nature of the solutes they contain. Most of the alloys with high solvus temperature have higher…
The early stage of the chromium precipitation in copper was analyzed at the atomic scale by Atom Probe Tomography (APT). Quantitative data about the precipitate size, 3D shape, density, composition and volume fraction were obtained in a…
The thermal decomposition behavior, the microstructural evolution and its influence on the mechanical properties of a supersaturated Cu Co solid solution with ~100 nm average grain size prepared by severe plastic deformation is investigated…
In this study atom probe tomography was used to investigate the microstructure of AA2198 (Al-1.35Cu-3.55Li-0.29Mg-0.08Ag) over a range of ageing conditions to examine the evolution of phases in the alloy, in particular aiming to reveal the…
The present work investigates the atomic interactions among Cu, Al, and Ni elements in bcc-iron matrix, focusing on the formation mechanism of nano-sized core-shell Cu precipitates. Using a combination of atom probe tomography (APT),…