相关论文: Comparative Analysis of Hybrid DC Breaker and Asse…
In the last decades, various events have shown that electromechanical oscillations are a major concern for large interconnected Alternating Current (AC) power systems. Segmentation of AC power systems with High Voltage Direct Current (HVDC)…
Protection against dc faults is one of the main technical hurdles faced when operating converter-based HVdc systems. Protection becomes even more challenging for multi-terminal dc (MTdc) systems with more than two terminals/converter…
Modern power system is undergoing a paradigm shift from the synchronous generators-based system to the power electronics converters-dominated system. With the high penetration of converters, serious stability problems are provoked,…
Model Predictive Control (MPC) method is a class of advanced control techniques most widely applied in industry. The major advantages of the MPC are its straightforward procedure which can be applied for both linear and nonlinear system.…
High-voltage direct current (HVDC) is an increasingly commonly used technology for long-distance electric power transmission, mainly due to its low resistive losses. In this paper the voltage-droop method (VDM) is reviewed, and three novel…
Due to generation retirements and growth of renewable energy sources integration, there will be widespread changes in the real and reactive power flow in nowadays power systems. These changes also bring about challenges on system operation…
In the last decades, various events have shown that electromechanical oscillations are a major concern for large interconnected Alternative Current (AC) power systems. DC segmentation - a method that consist in turning large AC grids into a…
High-voltage direct current (HVDC) is a commonly used technology for long-distance power transmission, due to its low resistive losses and low costs. In this paper, a novel distributed controller for multi-terminal HVDC (MTDC) systems is…
This paper addresses the problem of output voltage regulation for multiple DC-DC converters connected to a grid, and prescribes a robust scheme for sharing power among different sources. Also it develops a method for sharing 120 Hz ripple…
Protection system design for multi-terminal HVDC grids is challenging due to the complexity of the system and the often conflicting design requirements. Effective specification of protection component parameters (e.g., DC circuit breakers…
In the near future, point-to-point High Voltage Direct Current (HVDC) systems are expected to evolve into multi-terminal and meshed HVDC grids, predominantly adopting a bipolar HVDC configuration. Normally, bipolar HVDC systems operate in…
Having sufficient grid-forming sources is one of the necessary conditions to guarantee the stability in a power system hosting a very large share of inverter-based generation. The grid-forming function has been historically fulfilled by…
Multi-terminal high-voltage Direct Current technology based on Voltage-Source Converter stations (VSC-MTDC) is expected to be one of the most important contributors to the future of electric power systems. In fact, among other features, it…
Unlike conventional converters, modular multilevel converter (MMC) has a higher switching frequency -- which has direct implication on important parameters like converter loss and reliability -- mainly due to increased number of switching…
Modular multilevel converters (MMC) and cascaded H-bridge (CHB) converters are an established concept in ultra-high voltage systems. In combination with batteries, these circuits allow dynamically changing the series or parallel…
With Europe dedicated to limiting climate change and greenhouse gas emissions, large shares of Renewable Energy Sources (RES) are being integrated in the national grids, phasing out conventional generation. The new challenges arising from…
In order to improve dynamic characteristics of the power system with high-proportion renewable energy sources (RESs), it is necessary for the voltage source converter (VSC), interfaces of RESs, to provide inertial and frequency regulation.…
Modular Multilevel Converter-based High Voltage Direct Current (MMC-HVDC) system is a promising technology for integration of offshore wind farms (OWFs). However, onshore AC faults on MMC-HVDC reduce the power transfer capability of onshore…
DC microgrids provide an efficient framework for the interconnection of DC distributed energy resources (DERs) and DC loads. To continue to supply legacy single-phase AC loads, DC/AC converters can be integrated in the DC microgrid. The…
We propose a localized protection scheme based on modal analysis in multi-terminal modular multilevel converter (MMC) based high voltage DC (HVDC) systems. The paper addresses the issues of localized protection scheme based DC fault…